Detailed instructions for use are in the User's Guide.
[. . . ] PTZ CONTROL.
Turn On/Off recording.
PLAYBACK Resting the cursor on this icon will bring up five (PAUSE/ PIP/ ZOOM/ AUTO SEQ/ LOCK) display icons. PAUSE, to pause LIVE image PIP, picture in picture ZOOM, zoom in / out the screen size AUTO-sequence LOCK, activate the key lock.
Full screen display, multiple clicking to switch channels
Quad display.
2
GUI Hints and Tips
Recording is on Number represents the current selected LIVE audio channel Live Audio is off
Motion detected on the channel
Sensor triggered on the channel
Video loss detected on the channel
USB device detected
DVR has been connected onto the Internet.
AUTO-SEQ is on FREZZE is on, screen is frozen LOCK is on PTZ control is on
99%
Shows the current hard disk space used-up (99% means that the HDD space has been used up 99%, and the remaining HDD space is 1%) Current time which is used when providing the convertion of AVI files is shown on the bottom lower right of each DVR screen.
3
2. 2 Network Remote Instructions
Same user and DVR-site interface, the only difference is network toolbar which is situated on the lower bottom right.
Icon /
Description Low Video Quality (LQ) High Video Quality (HQ)
* Please refet to 4. 7. 2 HTTP setup
/
Full Screen Record Capture Image Record and captured files storage path settings Open / Close this tool bar
4
2. 3 Playback Mode
Playback Quick Function Icon
Press / button to Fast Rewind Speed : 2x, 4x, 8x, 16x, 32x, 64x Press / button to Fast Forward
Speed : 2x, 4x, 8x, 16x, 32x, 64x Press PLAY / button to Play/ Pause Playback
/
/ SLOW slow playback Speed : 1/2x, 1/4x, 1/8x, 1/16x / stop playback
Speed : 1/2x, 1/4x, 1/8x, 1/16x Playback channel by channel with snap shot display
Full screen display
Quad display
Zoom in video image
5
2. 4 PTZ Mode
PTZ Remote Controller Control
/ SLOW / / / ZOOM + ZOOM FOCUS + FOCUS IRIS + IRIS TOUR PRESET + NUMBER Move PTZ up. DVR will move to the preset location.
*
PLAY + NUMBER ZOOM PIP FREEZE
* Set current PTZ location as the start of the line-scan. *
Set current PTZ location as the start of the line-scan.
* Different brands of PTZ protocol sometimes may not be 100% compatible with each other.
Therefore, these functions may not be applicable. [. . . ] The lower value you set the higher sensitivity it will be Enter to setup motion detection area
4. 3. 1. 1 Motion Area Setup
There are partitions in motion detection area. Under initializing status, motion detection area is in the entire screen. Item
Mask Mouse Selection All Area Detection Mask All Area Continue Exit & Save Exit & Discard
Description
Select to mask the mouse selected area. Cancel setup and exit setup page.
15
4. 3. 2 Sensor Setup
Item
Alarm Duration(Seconds) Sensor Popup
Description
Alarm duration time (1~60 seconds). Check the box to Enable/Disable popup screen function for all channels. Drag the white bar or press to adjust Chroma (U) of your camera from value 0 to 255. Drag the white bar or press to adjust Chroma (V) of your camera from value 0 to 255. Drag the white bar or press to adjust Hue of your camera from value 0 to 255. Select to adjust audio volume under LIVE mode and recording mode.
4. 6 Account Setup
The Account Setup menu is used to provide role-based permission independently for each user (maximum of 4 users) to access the DVR over network. The default admin account is [admin] and password is "123456". User Name Password Permissions Change Change Admin Password
Description
Check to activate the user's account. Button automatically Auto Lock: The front panel function keys are ineffective only until using the mouse and please re-enter the password again. Function Auto Logout Key Lock Setting Key lock Key unlock × Disable × × Enter to set up Display Enter to set up Date/Time Enter to set up Buzzer & Relay Enter to set up Spot
Auto Lock
Display Setup Date/Time Setup Buzzer & Relay Setup Spot Setup
28
4. 9. 1 Display Setup
Item
Auto-Seq Interval ( Seconds) Show OSD Show DVR Status Show Date/Time Show Channel Name CRT Border Color
Description
Click or press to set up duration time in seconds for the interval between channels under Auto-Seq mode (1~999 seconds). Turn On / Off OSD display Turn On / Off DVR illustration and record status display Turn On / Off date and time display Turn On / Off channel name display Make the display more suitable for CRT monitor. black, dark grey, light grey, and white
29
4. 9. 2 Date/ Time Setup
Item
Hour Format Date Format Date/Time Position Change Date & Time Time Zone Setup Internet Time Setup 12HOURS/ 24HOURS
Description
MM-DD-YY/DD-MM-YY/YY-MM-DD Choose the position of Time and Date display Setup time and date of DVR Set up GMT and Daylight Saving Time. Setup automatic synchronization with internet server
4. 9. 2. 1 Change Date & Time Users are allowed to setup date and time of the DVR.
30
4. 9. 2. 2 Time Zone Setup
In time zone setup, users can change the time zone and activate Daylight Saving Time function according to your DVR location.
Item
Select Time Zone Daylight Saving Time
Description
Enter to modify GMT from GMT- 13 to GMT+ 13 Turn On/ Off Daylight Saving Time
4. 9. 2. 3 Internet Time Setup
Synchronize your DVR time with internet time server.
31
Item
Automatic Synchronization
Description
Check to enable DVR automatic synchronization function. Select this option to enable the function, DVR will automatically synchronize the time upon rebooting or by every 24 hours after booting.
Update Now
Date and Time show on DVR will immediately correspond with those in internet server.
4. 9. 3 Device Setup
32
Item
Mouse Speed
Description
Adjust the mouse moving speed
Buzzer & Relay Setup
Key Tone ALARM BUZZER ALARM RELAY Enable/ Disable keystrokes. Enable/ Disable buzzer operation when the alarm is triggered for HDD error, sensor, motion and vloss (Video Loss). Enable/ Disable the signal to be sent to the RELAY OUT blocks when the alarm is triggered for HDD error, sensor, motion and vloss.
4. 9. 4 Spot Setup
The DVR has two modes of video output; one is the main video output, the other is spot video output. SPOT setup is for controlling orders of channels that the system cycles through in SPOT mode. Interval (Seconds) Skip Video Loss Channel Channels
Description
The duration interval time between channels is in seconds under SPOT mode (1~999 seconds). Select which channels will be displayed in the sequence.
33
4. 10 Utility Setup
Item
HDD Initialization
Description
Select to enter hard disk initialization menu. [. . . ] Therefore, you can facilitate event sorting by setting up "criteria". Setup "start time" and "end time" for each event search, then the search result will be limited to this specific period of time. Only events and channels that are ; checked will be sorted in event search as well. 5. 1. 2 Time Search
TIME SEARCH, you can search for a specific time of the recording data to playback. [. . . ]