User manual OPTICOM IPB-610M DATASHEET

[. . . ] Do not bend the power cable forcedly or do not press it with heavy materials. Do not disassemble, repair or convert this product without permission. Do not open the cover of the product at your convenience or do not insert inductive stick into the ventilation hole. -Especially, SMPS is open, so only professional technicians are allowed to work on. Do not place equipment on the inclined or uneven plane. [. . . ] -360*240(CIF) -720*240(HALF-D1) -720*480(D1) RECORD MODE Set up record type. NORMAL/EVENT RECORD QUALITY Set up record quality. SCHEDULE Set each week's schedule. Chapter IV 49 EVENT EVENT This is for the control of all event items such as MOTION, SENSOR. MOTION SENSOR VIDEO LOSS SYSTEM Chapter IV 50 MOTION SETUP Set up the MOTION area & sensor. Click mouse right or MENU KEY button to see motion area window RECORD Set pre& post record mode. When record frames are less, PRE/POST RECORD need to be set a lot more for correct record search. ACTION Setting up list for how to act after EVENT. - WRITE LOG :Select to write LOG info. Chapter IV 51 SENSOR SETUP Set the SENSOR name & TYPE. NORMAL OPEN : Normally it opens and sends signals when detects sensors. NORMAL CLOSE : Normally it closes, and it sends SIGNAL when detects sensors. RECORD Set Connecting camera, Pre, post record. When record frames are less, PRE/POST RECORD need to be set a lot more for correct record search. ACTION Setting up list for how to act after EVENT. - WRITE LOG :Select to write LOG info. Chapter IV VIDEO LOSS VIDEO LOSS can be an event type and can set camera record and action. 52 SETUP Select whether you want VIDEO LOSS Function or not. RECORD Set connecting camera Pre& post record. When record frames are less, PRE/POST RECORD need to be set a lot more for correct record search. ACTION Setting up list for how to act after EVENT. - WRITE LOG :Select to write LOG info. Chapter IV 53 SYSTEM Sets how to operate event related with DISK mainly. DISK FULL Sets when HDD is full of record. DISK ERROR Sets when there is an error on HDD. S. M. A. R. T Enables the system to prevent possible malfunction of HDD by interfacing between system and HDD. If you found "BAD HDD" mark in the S. M. A. R. T function, please exchange HDD as soon as possible 54 Chapter-V. SEARCH Chapter V 55 SEARCH 3 1 2 1 Playback Screen : Record Playback 2 Playback Time 3 Display Status : Playback Time Display Playback Icon Pause () Playback () Multiple Playback( , , ) It randomly shows the first searched record file when it goes to SEARCH MODE. This type is the same as on event search , so it is possibly not to shows The exact record file searched . Chapter V 56 SEARCH MENU DISPLAY Select screen division mode. You can check temperature and status at real time. 4 REMOTE SEARCH Execution and Set Up Set Up Execution Pressing each button operates REMOTE SEARCH or Set Up. REMOTE (LIVE) and REMOTE SEARCH are made up in separate program. REMOTE SEARCH Execution Chapter VI 66 Remote Set Up <Camera> 1 2 3 4 1 No : Item to select camera No To set up all the camera equally, Choose "select all" Enable : Selection item to use camera, Removing the check stops using that channel. 2 Title : Item to revise/type the camera name. Parity : Item to select Parity. 4 Audio : Item to select which audio channel to be used among total 4 audio inputs. Chapter VI 67 Remote Setup <Alarm> 1 1 No : Item to select Alarm No. To set up all the camera equally, Choose "select all" Enable : Item to select to use Alarm, Removing the check stops using that channel. - Normal Close : Type of alarm close in general situation. Chapter VI 68 Remote Set Up <Record> 1 2 1 No : Item to select Camera No. - NTSC : 720X480, 720X240, 360X240 - PAL : 720X576, 720X288, 360X288 Normal Record Frame :Item to select normal record frame. Event Record Frame :Item to select Event (Motion + Sensor + Video Loss) record speed. Event Record Quality : Item to select Event (Motion + Sensor + Video Loss) record quality. Schedule : Item to select record schedule. - Normal : Always Record - Event : Motion, Sensor, Video Loss - N + E : Always + Event Record - Clear : Delete the current record schedule. Chapter VI 2 Remote Set Up <Record (Timetable)> 69 1. Select the Record Mode 2. Select Day/Time Schedule Indication by color Normal(N) : (Blue) Event(E) : (Red) Normal(N) + Event(E) : (Green) Clear (No Record) : (White) < Schedule of Record> It is the list of selection in which schedule to use in operating the relevant camera channel. First select the item you need among Normal time, Event and Normal time + Event. [. . . ] : Print current image of the channel. Chapter VI 8 81 Channel Button Moves to the channel selected and it has the same function as double click the left mouse button on the selected channel. 9 Layout Modify Button Screen Division Button : Selects desirable screen division. Whole Screen : All buttons are hidden and the screen displays full. Left double click of mouse returns to the previous screen from whole screen. Chapter VI 10 82 PTZ Operation A camera supporting PTZ can be used on Remote Viewer program. Refer to PTZ support list Direction Button : Button to move top, bottom, left, right Channel Indication : Indicate current channel Speed Control Button : Button to control moving speed Image Control Button : Button to adjust Zoom, Focus, Iris Pre set move button Pre set save button Preset Move: Move to saved preset No. Preset Save : Save preset No. <Preset Move> <Preset Save> Chapter VI 83 Remote Search 1 4 12 5 6 7 10 8 9 2 3 11 1 Playback Display Camera Name Green Border Line : Display the selected camera. Recorded Date/Time 2 SECTION Selects section Section is created when Date/Time is changed to former times. [. . . ]