User manual OLYMPUS PT-052

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OLYMPUS PT-052. We hope that this OLYMPUS PT-052 user guide will be useful to you.


OLYMPUS PT-052 : Download the complete user guide (2814 Ko)

You may also download the following manuals related to this product:

   OLYMPUS PT-052 (1731 ko)
   OLYMPUS PT-052 (2668 ko)
   OLYMPUS PT-052 (2740 ko)
   OLYMPUS PT-052 (2785 ko)
   OLYMPUS PT-052 (1738 ko)

Manual abstract: user guide OLYMPUS PT-052

Detailed instructions for use are in the User's Guide.

[. . . ] OLYMPUS CORPORATION shall not be responsible in any way for lost profits or any claims by third parties in case of any damage occurring from unsuitable use of this product. OLYMPUS CORPORATION shall not be responsible for damage, lost profits, etc. caused by loss of image data because of defects, disassembly, repair or modification of this product by people other than third parties specified by OLYMPUS CORPORATION, or for other reasons. Please read the following items before use This Case is a precision device designed for use at a water depth within 40 m. Please use the Case correctly after sufficient understanding of the contents of this manual in regard to handling of the Case, checks before use, maintenance, and storage after use. [. . . ] In this case, press an operation button for cancellation of sleep mode. Check the operation of the camera. Confirm the operation according to the instruction manual for the digital camera. Open the Case. Insert the buckle opener of the accessory into the buckle opening lever as shown in the figure (in direction ) Pull the buckle opener slowly (in direction ). When not using the buckle opener, hold the buckle opening lever with your thumb and index finger from the side and pull it up slowly. Pull up the mode dial of the case. Pull up the mode dial of the case until it stops, so that it does not interfere with the mode dial of the digital camera. E-15 Load the digital camera. Quietly load the digital camera into the Case, taking care that the projecting part of the zoom lever of the digital camera properly fits into the recessed part of the zoom lever of the Case. Setting the Zoom Lever When loading the digital camera in the Case, fit the projecting part of the zoom lever of the digital camera into the recessed part of the zoom lever on the inside of the Case. CAUTION : · When loading the camera, confirm that the projecting part of the zoom lever of the camera is properly set to the recessed part of the zoom lever of the Case. · When the setting is insufficient, the loading of the camera becomes imperfect and it may not be possible to seal the Case or zooming may not function. Insufficient sealing will cause water leakage. Set the mode dial. After the digital camera has been loaded, push down the mode dial of the case from the upper surface of the case and set it so that the lower part of the mode dial of the case on the inside of the case fits properly onto the upper part of the mode dial of the digital camera. Advice · After properly fitting the case's mode dial knob, turn the knob to make sure that the camera's mode dial switches before closing the case tightly. E-16 Insertion of silica gel Before sealing the Case, insert the accessory silica gel bag for prevention of fogging between the bottom of the camera and the Case. Insert the bag with the glued longer side to the inside. Pay attention to the orientation. CAUTION : · Insert the silica gel all the way at the specified location and with the specified orientation. When the orientation is not correct, the silica gel bag will be caught when the Case is sealed and water leakage will be caused. · When it is tried to seal the Case with the bag inserted only part of the way, the silica gel bag will be caught by the O-ring and water leakage will be caused. · Once silica gel has been used, the moisture absorption performance will be impaired. Always exchange the silica gel when the Case is opened and closed. E-17 Check the loading status. Always perform the following final checks before sealing the Case. from the joint between the front and rear lid, the shutter lever, the palm grips, and the buckles. CAUTION : · Especially when waterdrops remain between the front and the rear lid, they may spill to the inside when the Case is opened. · When opening the Case, take sufficient care that no water will drop from your hair or body onto the Case and the camera. · Before opening the Case, make sure that your hands or gloves are free of sand, fibers, etc. · Do not open or close the Case at locations where water or sand is to be sprayed. When this cannot be avoided because you have to exchange the battery or the image storage, place a sheet downwind from some object and take care that no water or sand is sprayed. · Take care not to touch the digital camera or the battery with hands wet with sea water. in advance with pure water and keep it in a plastic bag, so that you can wipe the salt from your hands and fingers before handling the camera. E-23 Take out the digital camera. Open the case carefully, pull up the mode dial from the upper surface of the case to disengage it from the mode lever of the camera, and then remove the digital camera from the case. CAUTION : · Always place the opened Case with the O-ring side facing up. When the Case is placed with the O-ring side facing down, dirt or other foreign matter may be attached to the O-ring or the O-ring contact surface and may cause water leakage during the next dive. · Please read the operation manual for the digital camera for the storage of pictures etc. · Take special care so that no water drops get onto the camera. E-24 Wash the Case with pure water. After use, seal the Case again after taking out the camera and wash it sufficiently in pure water as soon as possible. After use in sea water, it is effective to immerse it for a fixed time in pure water to remove any salt. CAUTION : · Water leakage may be caused when a high water pressure is applied locally. [. . . ] Replace the O-ring immediately by a new one if it shows signs of damage, cracking or loss of elasticity. (1) Never use the following chemicals for cleaning, corrosion protection, defogging, repair or other purposes. · Never use alcohol, thinner, benzene or similar volatile organic solvents or chemical detergents to clean the Case. When repair is required, please contact a service station of our company or your dealer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE OLYMPUS PT-052




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OLYMPUS PT-052 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.