User manual NUMARK MX25

[. . . ] MX25 PROFESSIONAL DUAL CD PLAYER MANUAL ©2001 Industries http://www. numark. com MX25 SAFETY INSTRUCTIONS a) b) c) d) e) f) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. Retain Instructions - The safety and operating instructions should be kept for future reference. Heed Warnings - All warnings on this product and in these operating instructions should be followed. Follow Instructions - All operating and other instructions should be followed. [. . . ] Track Buttons: These buttons are used to select the track to be played. Search Button: Pressing this button allows you to use the wheel and rapidly scan the music to find a cue point. The search function automatically shuts off after 8 seconds of non-use or you may toggle it off. The cue point is set as the initial start point on a track or can be moved when play is started at a different point. For instance if the music is paused then play is pressed a new cue point is set. Alternately pressing the PLAY button and the CUE button allows the CD to be played from the same position any number of times. Note: Pressing cue 2 times plays music temporarily from this point until the button is released. - The Leader in DJ Technology ©2001 Numark Industries -6- http://www. numark. com MX25 8. Play/Pause: Starts the music from the cue point or pauses it while in play. Jog Wheel: Cue Function: As explained under "CUE", when the music is paused and you rotate the wheel, music will sound. Search Function: As explained under "SEARCH BUTTON", when search is press and you rotate the wheel, the music will rapidly scan the music to find a cue point. Pitch Bend Function: allows the user to temporarily change the speed of the music to align beats. When the beats of the music of the CD you wish to match is fast compared to the tempo of the other music rotate the jog wheel counter clockwise (to the left). Pitch Range: actives the pitch slider and adjusts the amount of control the pitch slider has on the overall speed of music. Pitch Slider: By moving the slider in the (+) direction the speed of the music permanently speeds up. By moving the slider in the (-) direction the speed of the music permanently slows down. MINUTES - Shows the minutes elapsed or remaining depending on mode setting. SECONDS - Shows the seconds elapsed or remaining depending on mode setting. FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. SEARCH ­ indicates when the unit is searching through the music 10. CONTINUOUS PLAY ­ Shows when the unit is set to play back the entire CD without stopping between tracks. SINGLE PLAY- Shows when the unit is set to play just one track at a time. TIME BAR - Shows either track elapsed time, remaining track time, or remaining total time depending on the setting of the "time" button. [. . . ] To obtain service under this Limited Warranty, purchaser must first contact NUMARK and obtain a return authorization number ("RA#"). Purchaser must then return the mixer to NUMARK in an adequate container for shipping, accompanied by purchaser's sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and assistance on where to return the mixer, contact NUMARK customer service at 401-295 9000. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned or new product. [. . . ]