User manual NUMARK MPCD3
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NUMARK MPCD3. We hope that this NUMARK MPCD3 user guide will be useful to you.
Manual abstract: user guide NUMARK MPCD3
Detailed instructions for use are in the User's Guide.
[. . . ] CDN15/MPCD3
PROFESSIONAL CD PLAYERS
USER'S MANUAL
©2002 Industries http://www. numark. com
CDN15/MPCD3 SAFETY INSTRUCTIONS
a) b) c) d) e) f) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. Retain Instructions - The safety and operating instructions should be kept for future reference. Heed Warnings - All warnings on this product and in these operating instructions should be followed. Follow Instructions - All operating and other instructions should be followed. [. . . ] Remote Start Connector: Use this connector to plug into your fader start compatible mixer or remote switch as described in the setup section of this manual. To use this connector for fader start, connect a fader start cable to a fader start compatible mixer. Every time you move the crossfader on the mixer over to the side that the unit is on, it will automatically start playing. There are two potential modes associated with the switch PLAY-CUE and PLAY/PAUSE. This means that when the unit is remotely stopped it will go back to the cue point automatically. To change modes hold down the "time" button for 3 seconds and the display will flash the play " " and pause " " icons. In PLAY/PAUSE mode, moving the crossfader away from the unit side pauses right where it is, and resumes when the fader is brought back to the unit. To change modes back to PLAY-CUE hold down the "time" button for 3 seconds and the display will flash the play " " and cue " " icons in the display. Remote Assignment Switch: Set this switch in the position for the method of remote start you will be using. Foot switches are often used for creative mixing techniques and can be found in most music shops. Connector plugs are often ¼" and an adapter to 1/8" will be needed for connection. There are also two types of footswitches that will work with this connector. The first is a typical, on/off pushbutton switch and are generally used for switching channels on guitar amps. The second switch is a momentary footswitch and is usually used for keyboard sustain pedals. If you are unsure of the style of switch you have, try each position until it works as desired. · · · ON-OFF for use with an ON-OFF switch. Digital Output: The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). In order to use the digital output you should not use variable pitch slider and the pitch bend buttons. If you adjust the pitch, other devices may not read the digital output properly because the sampling rate changes.
- The Leader in DJ Technology ©2002 Numark Industries
-8-
http://www. numark. com
CDN15/MPCD3
DISPLAY FEATURES
1. MINUTES: Shows the minutes elapsed or remaining depending on mode setting. SECONDS: Shows the seconds elapsed or remaining depending on mode setting. FRAMES: The CD Player breaks down a second into 75 frames for accurate cueing. [. . . ] To obtain service under this Limited Warranty, purchaser must first contact NUMARK and obtain a return authorization number ("RA#"). Purchaser must then return the mixer to NUMARK in an adequate container for shipping, accompanied by purchaser's sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and assistance on where to return the mixer, contact NUMARK customer service at 401-295 9000. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned or new product. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE NUMARK MPCD3
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NUMARK MPCD3 will begin.