User manual NUMARK CDN36

[. . . ] CDN 36 PROFESSIONAL DUAL CD PLAYER OWNER'S MANUAL ©2002 Industries http://www. numark. com CDN 36 SAFETY INSTRUCTIONS a) b) c) d) e) f) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. Retain Instructions - The safety and operating instructions should be kept for future reference. Heed Warnings - All warnings on this product and in these operating instructions should be followed. Follow Instructions - All operating and other instructions should be followed. [. . . ] Every time you move the crossfader on the mixer over to the side that the unit is on, it will automatically start playing. There are two potential modes associated with the switch PLAY-CUE and PLAY/PAUSE. This means that when the unit is remotely stopped it will go back to the cue point automatically. To change modes hold down the time button for 3 seconds and the display will flash the play " " and pause " " icons. In PLAY/PAUSE mode, moving the crossfader away from the unit side pauses right where it is, and resumes when the fader is brought back to the unit. To change modes back to PLAY-CUE hold down the time button for 3 seconds and the display will flash the play " " and cue " " icons in the display. Remote Assignment Switch - Set this switch in the position for the method of remote start you will be using. Foot switches are often used for creative mixing techniques and can be found in most music shops. Connector plugs are often ¼" and an adapter to 1/8" will be needed for connection. There are also two types of footswitches that will work with this connector. The first is a typical, on/off pushbutton switch and are generally used for switching channels on guitar amps. The second switch is a momentary footswitch and is usually used for keyboard sustain pedals. If you are unsure of the style of switch you have, try each position until it works as desired. · · · ON-OFF ­ for use with an ON-OFF switch. MIXER ­ for use with a fader start compatible DJ mixer - The Leader in DJ Technology -8- ©2002 Numark Industries http://www. numark. com CDN 36 DISPLAY FEATURES 1. MINUTES - Shows the minutes elapsed or remaining depending on mode setting. SECONDS - Shows the seconds elapsed or remaining depending on mode setting. FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. PROGRAM - Used for preprogramming the track order to be played automatically by the unit. This is a great function if you need to leave the CD player alone. 10. AUTOSTART ­ will light when the unit is set to relay from CD unit to CD unit. CONTINUOUS PLAY ­ Shows when the unit is set to play back the entire CD without stopping between tracks. [. . . ] Purchaser must then return the mixer to NUMARK in an adequate container for shipping, accompanied by purchaser's sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and assistance on where to return the mixer, contact NUMARK customer service at 401-295 9000. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned or new product. Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on the original mixer or for (90) days, whichever is longer. [. . . ]