User manual NUMARK CDN20S Operating Manual
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NUMARK CDN20S. We hope that this NUMARK CDN20S user guide will be useful to you.
Manual abstract: user guide NUMARK CDN20SOperating Manual
Detailed instructions for use are in the User's Guide.
[. . . ] ®
Professional Disc Jockey Products
CDN-20S
PROFESSIONAL DUAL CD PLAYER
OPERATING MANUAL
©2000
Industries
http://www. numark. com
CDN-20S
Safety Information and Product Registration
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.
7. Ventilation - The appliance should be situated so that it's location or position does not interfere with it's proper ventilation. [. . . ] The pitch will automatically drop while the button is pressed (allowing "fall back") and return to
the original pitch when the button is released. By changing the pitch of one disc with respect to the other in this way the beats can be matched.
10. SEARCH Depress and hold the right button and the
CD will rapidly advance forward through the music. When the CD is paused the cue point can be adjusted by tapping either button. CUE - Pressing the CUE button during play provides a return to the position at which play was started. Alternately pressing the PLAY button and the CUE button allows the CD to be played from the same position any number of times. The CUE LED will light up from the time the CUE button is pressed until the CD has reset to the position at which play was started. START/PAUSE (Play/Pause Button) - Each press of the Play/Pause Button causes the operation to change from play to pause or from pause to play. PITCH SLIDER - The pitch can be changed up to +/12% by pressing the PITCH button so the PITCH LED is lit, then moving the sliding fader. RELAY/FADER START By pressing this button the player will alternate playing from side to side or can be activated by a mixer containing the fader start feature. In continuous mode the relay feature will have the player complete playing the full CD then switch to the other side. If fader start cables are attached to a fader start mixer, then, the actions of the mixer can control to CD player. DIGITAL OUTPUTS - The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). In order to use the digital output you can not use variable pitch slider and the pitch bend buttons or loop. If you were able to adjust the pitch, other devices will not read the digital output properly because the sampling rate changes.
- The Leader in DJ Technology ©2000 Numark Industries
-7-
http://www. numark. com
CDN-20S
DESCRIPTION OF THE PLAY/PAUSE, CUE, AND LOOP OPERATIONS
PLAY and CUE
Pressing the "PLAY/PAUSE" button starts the disc. Pressing the "CUE" button will reset the disc to the last place where the disc was started. By alternately pressing the "PLAY/PAUSE" button and the "CUE" button, the disc may be returned and played from the cue point any number of times. This function is called back cue.
PLAY, PAUSE and CUE
EDITING CUE POINT
When the search button is tapped while a cue point is set, a new cue point can be located. The CD player will repeatedly play small parts of the CD as you move it to the desired position. By pressing "PLAY/PAUSE" then "CUE" you can confirm that this new cue point is desirable
USING THE LOOP
This function is repeating certain areas of the CD. Such as vocal stabs or for allowing the beginning of a song repeat itself so you may leave the DJ console and interact directly with your crowd. To set a loop start point just press the "LOOP" button while the CD is playing when it reaches the desired start point. [. . . ] To obtain service under this Limited Warranty, purchaser must first contact NUMARK and obtain a return authorization number ("RA#"). Purchaser must then return the mixer to NUMARK in an adequate container for shipping, accompanied by purchaser's sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and assistance on where to return the mixer, contact NUMARK customer service at 401-295 9000. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned or new product. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE NUMARK CDN20S
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NUMARK CDN20S will begin.