User manual NORCENT LM760

[. . . ] FCC Warning To assure a continued FCC compliance, a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this monitor would void the user`s authority to operate this device. Note: If necessary, shielded interface cables and AC power cord must be used to meet the emission level limits. EMI Certification The Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation. [. . . ] Windows users : Setting the Timing Mode (Resolution and Refresh Rate) Example: 1024 x 768 @ 60 Hz Resolution Right-click on the Windows desktop > Properties > Settings > "Desktop Area". Refresh Rate (vertical frequency) See your graphic card's user guide for instructions. 3. Power-ON computer and monitor Power-ON the computer, then Power-ON the monitor. 2 Front Panel Control ACTIVATE/EXIT OSD SCROLL DOWN/DECREASE SCROLL UP/INCREASE SELECT DESIRED FUNCTION POWER ON/OFF LED INDICATOR Installation POWER AC INLET VIDEO CABLE AUDIO INPUT 3 How to install the Stand (Fig 1) (Fig 2) (Fig 3) (Fig 4) 1. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Then place the monitor flat on a table with front screen facing down (see Fig 1). 2. Unpack the base and mount it onto the swivel neck, remember to align the holes to the hook located underneath the swivel neck (see Fig 2). Slide the base upward until it makes a click sound, indicating the base has being securely fasten (see Fig 3). Place the monitor on an upright position (see Fig 4). 3. 4. 4 How to uninstall the Stand (Fig 1) (Fig 2) (Fig 3) (Fig 4) (Fig 5) 1. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Then place the monitor flat on a table with front screen facing down (see Fig 1). Use one hand to hold the monitor body and the other hand to hold stand, then slowly push the hook up until hearing a click sound (see Fig 3). Hold the monitor firmly with one hand and slide the stand downward with the other hand (see Fig 4). Slide it slowly or you will accidentally damage the monitor and stand (see Fig 5). After making adjustment, press button to save changes and exit the screen. Main Menu Auto Adjust: Automatically adjusts the horizontal position, vertical position, phase (Fine Tune) and Clock (H. Size). 6 Contrast: To adjust the foreground white level of screen image. Press to decrease the contrast. Brightness: to adjust the background black level of screen image. Press to decrease the brightness. Color Temperature: provides four preset color adjustments: 9300K, 6500K, 5400K, and with these changes will improve the 7 brightness and color saturation. Press button to select the preset color. User Color: Individual adjustments for red(R), green (G), blue (B). Press to confirm your adjustments. Information: Displays input signal information regarding the current setting from the graphic card in your computer. Note: If you wish to change your settings please refer to your graphic 8 card user guide for more information. Image Adjust: Allows users to select and adjust the Horizontal /Vertical position, H. Position: To adjust the horizontal and vertical position of the screen. [. . . ] Input Voltage 1W x 2 AC100-240 V 60/50Hz 1. 2A 14 Care and Maintenance Care Avoid exposing your monitor from direct sunlight or other heat source. For better performance and glare reduction please place your monitor away from the sun. Make sure that your monitor is installed in a clean and moisture-free area. Keep your monitor away from magnets, motors, transformers, speakers, and TV sets. Note: 1. [. . . ]