User manual NORCENT LM560

[. . . ] FCC Warning To assure a continued FCC compliance, a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this monitor would void the user`s authority to operate this device. Note: If necessary, shielded interface cables and AC power cord must be used to meet the emission level limits. EMI Certification The Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation. [. . . ] Windows users : Setting the Timing Mode (Resolution and Refresh Rate) Example: 1024 x 768 @ 60 Hz Resolution Right-click on the Windows desktop > Properties > Settings > "Desktop Area". Refresh Rate (vertical frequency) See your graphic card's user guide for instructions. 2. Connect power cord Connect the power cord to a properly grounded AC outlet, then to the monitor. Power-ON computer and monitor Power-ON the computer, then Power-ON the monitor. 2 Front Panel Control OSD ON/OFF SCROLL DOWN SCROLL UP ENTER POWER INDICATOR POWER ON/OFF Installation POWER INPUT (AC INPUT) VIDEO CABLE AUDIO IN 3 Using OSD Functions 1. After making adjustment, press button to save changes and exit the screen. Main Menu Auto Adjust: Automatically adjusts the horizontal position, vertical position, phase (Fine Tune) and Clock (H. Size). Contrast: To adjust the foreground white level of screen image. Press to decrease the contrast. 4 Brightness: to adjust the background black level of screen image. Press to decrease the brightness. Color Temperature: provides four preset color adjustments: 9300K, 6500K and these changes will improve the brightness and color saturation. Press button to select the preset color. User Color: Individual adjustments for red(R), green (G), blue (B). Press to confirm your adjustments. 5 Information: Displays input signal information regarding the current setting from the graphic card in your computer. Note: If you wish to change your settings please refer to your graphic card user guide for more information. Image Adjust: Allows users to select and adjust the Horizontal /Vertical position, H. Position: To adjust the horizontal and vertical position of the screen. Press to decrease the width of the screen. Fine Tune: To adjust the delay time. Press to decrease the fine tune. Sharpness: To adjusts the clarity on a non-XGA (1024x768) signal. Press to confirm selection. Setup Menu: To set language Select, Resolution Notice, OSD position and OSD Time Out. Press to confirm your selection. 7 Language Select: Allows the user to choose from available languages. Press to confirm your selection. Resolution Notice: If the function is "enable", a message will appear on the screen "For best picture quality change resolution to 1024 x 768" after 30 seconds Powering ON or when changing resolutions to (640 x 480/ 720 x 400 / 800 x 600). And if the function is "disabled " then the message will not be displayed. OSD Position: Press the button to select the horizontal or vertical OSD position. Horizontal OSD Position will horizontally reposition all OSD screens. 8 Press or to move the OSD Right or Left. Press or to move the OSD Up or Down. OSD Time Out: Sets the length of time the OSD screen is displayed before exiting. Memory Recall: Return all adjustments back to factory default settings. [. . . ] For packing, please remember to use more force to bend backward but not to exceed 20 º degree range and please make sure to store the monitor into the original package. Caution: Panel exceeding -1º to +20º degree is considered unsuitable and harms will be unpredictable. Safety Tips: If you see smoke, hear abnormal noise or smell odor coming out of your monitor, be very cautious to remove the power cord immediately and call your service center. The display unit contains high-voltage parts and may cause electric shock to human bodies. Always call your service center or a qualified technician to fix it. Troubleshooting No power Make sure A/C power cord is securely connected to the power outlet and the power cord is firmly connected to the monitor. [. . . ]