User manual NORCENT DC420

[. . . ] 30-E Digital Camera >> Recording Voice Memos A voice memo can be recorded once for 30 seconds at still image mode immediately following a still image captured or at playback mode while viewing the picture. Press the MENU button, and select the [Function] menu with the button. Select [VOICE MEMO] with the / Adjust buttons, and press the SET button. Compose the picture, press the shutter button down halfway, then press it down fully. [. . . ] Select the desired setting with the / buttons, and press the SET button. To exit from the still image menu, press the MENU button. Adjust Adjust Adjust Size This sets the size of the image that will be photographed. [ ] 2272 x 1704: 2272 x 1704 pixels (4M) [ ] 1600 x 1200: 1600x 1200 pixels (2M) ] 1280 x 960: 1280 x 960 pixels (1M) [ ] 640 x 480: 640 x 480 pixels (VGA) [ User's Manual >> Quality This sets the quality (compression rate) at which the image is taken. [ [ ] Standard: Normal [ ] Economy: High compression rate Sharpness This sets the sharpness of the image that will be photographed. Hard: Hard touch Normal: Normal touch Soft: Soft touch Contrast This sets the difference between the bright and dark portions of the image that will be photographed. Soft: Decreases the contrast. Color This sets the color of the image that will be photographed. Standard: Standard color Vivid: Bright color Sepia: Sepia Monochrome: Black-and-white E-55 White Balance This sets the white balance photographing under a variety of lighting conditions and permits photographs to be taken that approach the conditions that are seen by the human eye. [ 1 ] Fluorescent 1: Photography under a daylight fluorescent tube with a bluish cast. [ 2 ] Fluorescent 2: Photography under a daylight white fluorescent tube with a reddish cast. [ [ ] Manual: Photography with a Manual WB. 56-E Digital Camera >> Manual WB This manually sets the white balance and stores it. Use of this is convenient when the white balance does not offer a good match. Before select [Execute] determine the subject (such as a white paper) that will be used to set the white balance. Execute: Enable manual white balance. ISO This sets the sensitivity for taking pictures. When the sensitivity is raised (and the ISO figure is increased), photography will become possible even in dark locations, but the more pixilated (grainer) the image will appear. Auto: Automatic setting in the range of ISO 50 to 200. Metering This sets the metering method for calculating the exposure. [Blank] Multi: The entire area of the screen is measured, and the exposure is calculated. [ ] Spot: A very small portion of the center of the screen is measured, and the exposure is calculated. User's Manual >> Still Image Menu (Function) 1. Press the MENU button, and select the [Function] menu with the button. Select the desired [Function] option item with the / buttons, and press the SET button to enter its respective menu. Select the desired setting with the / buttons, and press the SET button. To exit from the still image menu, press the MENU button. Adjust Capture Mode This sets the recording method at the time of taking pictures. [ ] Continuous: Permits continuous photography of 3 pictures max, at the fastest interval of 0. 5 seconds. [. . . ] You can download (transfer) images by copying them from the "Removable disk" ("untitled" or "unlabeled" disk on a Macintosh) to your computer hard drive. Windows Open the "removable disk" and subsequent folders by double clicking on them. Select the images that you want, and then choose "Copy" from the "Edit" menu. Open the destination location (folder) and choose "Paste" from the "Edit" menu. You may also drag and drop image files from the camera to a desired location. Macintosh Open the "untitled" disk icon, and the destination location on your hard disk. [. . . ]