User manual NOKIA 5140I

[. . . ] User guide 9238054 / Issue 3 DECLARATION OF CONFORMITY We, NOKIA CORPORATION, declare under our sole responsibility that the product RM-104 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www. nokia. com/phones/declaration_of_conformity/. 0434 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Copyright © 2006 Nokia. [. . . ] To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data connection. Select When needed to set the packet data connection to be established when an application needs it. Select Always online to set the phone to automatically connect to an packet data network when it is switched on. indicates a packet data connection. Modem settings You can connect the phone using an IR or a data cable (CA-42) connection to a compatible PC, and use the phone as a modem to enable packet data connectivity from the PC. 53 Settings To define the settings for connections from the PC, select Menu > Settings > Connectivity > Packet data > Packet data settings > Active access point, activate the access point you want to use, and select Edit active access point. Select Alias for access point, and enter a nick name for the currently selected access point. Select Packet data access point, and enter the access point name (APN) to establish a connection to an EGPRS network. You can also set the dial-up service settings (access point name) on your PC using the Nokia Modem Options software. If you have set the settings both on the PC and on your phone, the PC settings are used. Call Select Menu > Settings > Call and from the following options: Automatic volume control -- to set the phone to automatically adjust the speaker volume according to the background noise Call divert (network service) -- to divert your incoming calls. You may not be able to divert your call, if some call barring functions are active. Anykey answer > On -- to answer an incoming call, briefly press any key, except the end key and the left and right selection keys. Automatic redial > On -- to set your phone to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt Speed dialling > On -- to activate speed dialling. Call waiting > Activate -- to set the network to notify you of an incoming call while you have a call in progress (network service). Summary after call > On -- to briefly display the approximate duration and cost (network service) of the call after each call Send my caller ID (network service) > Yes, No, or Set by network 54 Settings Line for outgoing calls (network service) -- to select the phone line 1 or 2 to make calls, if supported by your SIM card Phone Select Menu > Settings > Phone and from the following options: Language settings -- to set the display and writing language Memory status -- to view the free and used memory in Gallery, Messages, and Applications Automatic keyguard -- to set the keypad of your phone to lock automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. Security keyguard -- to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Cell info display > On -- to receive information from the network operator depending on the network cell used (network service). Welcome note -- to enter a welcome note to be shown briefly when the phone is switched on Operator selection > Automatic -- to set the phone automatically to select one of the cellular networks available in your area. With Manual, you can select a network that has a roaming agreement with your home network operator. Help text activation -- to select whether the phone shows help texts Start-up tone -- to select whether the phone plays a start-up tone when the phone is switched on Enhancement This menu is shown only if the phone is, or has been, connected to a compatible mobile enhancement. 55 Settings Select Menu > Settings > Enhancements. You can select an enhancement menu if the corresponding enhancement is, or has been, connected to the phone. Depending on the enhancement, select from the following options: Default profile -- to select the profile that you want to be automatically activated when you connect to the selected enhancement Automatic answer -- to set the phone to answer an incoming call automatically after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off. Select Automatic to set the lights on for 15 seconds after a key press Text phone > Use text phone > Yes -- to use the text phone settings instead of headset or loopset settings Configuration You can configure your phone with settings that are required for certain services to function correctly. [. . . ] You should never rely solely on any wireless device for essential communications like medical emergencies. To make an emergency call: 1. Some networks may require that a valid SIM card is properly inserted in the device. Press the end key as many times as needed to clear the display and ready the device for calls. If certain features are in use, you may first need to turn those features off before you can make an emergency call. [. . . ]