User manual NOKIA 252

[. . . ] OWNER'S MANUAL NOKIA 252 REPLACE WITH COVER Retractable antenna. Extend fully during calls. Confirms and selects choices on display. 0-9, , #: Used to enter numbers and characters. Switches the phone on and off when pressed and held. For Your Safety Read these simple guidelines before using your phone. [. . . ] to choose On or Off. Security Settings (Menu 4) This menu lets you change your phone's security and lock codes, which are required for certain functions. Press 2. . To access Menu 4, press 0(18, then w until you see The phone asks for your security code. Change Lock Code (Menu 4 1) The lock code is required when you want to lock your phone. The phone briefly displays LOCK CODE CHANGED. Change Security Code (Menu 4 2) The security code allows access to the lock code and certain submenus, so it should be kept in a secret and safe place, separate from the phone. 4) When the phone asks you to verify your new security code, enter it again and press 2. . 5) The phone briefly displays SECURITY CODE CHANGED. Restore Factory Settings (Menu 4 3) This function resets the phone's menus to their factory settings. Note: The lock code and security code are not changed when you reset the menu settings. 5) If you press 2. , the phone briefly displays SETTINGS RESTORED. 45 Call Settings (Menu 5) This menu lets you store calling card information in your phone, and set up calling restrictions. Calling Card (Menu 5 1) With this menu you store calling card information for up to 2 cards in your phone. Then you can make calling card calls without having to enter the calling card information each time. To make a calling card call, see "Calling Card Calls" on page 18. Remember, to use the automated method of making calling card calls, you must have entered all the necessary card details and selected the card (using this menu). If only the details for one card are entered, there is no need to use the Select feature. But, if you then add the details of another card, the second card will automatically become the card in use. This name is only used for card identification on the phone display, and has no effect on the sending sequence. `Card A' and `Card B' will be replaced by the names you enter. If you need further information about specific dialing sequences, contact your calling card company. 46 To Enter or Change Calling Card Information 1) Press 0(18 then w until you see CALL SETTINGS. 3) Use w to move the pointer to None, Card A or Card B, then press 2. . If you select None, the phone briefly displays NO CARD SELECTED, and no card is selected. Note: If you've already stored card information, and then later select None, the active card is deselected. If you select Card A or Card B, and you've never entered information for the card before, skip to Step 5. 4) If you've already entered information for a Card, you then have the option to Select, Edit, or Erase the card. [. . . ] Tel: (905) 427-6654 USA NOKIA MOBILE PHONES ­ 6200 Courtney Campbell Causeway, Suite 900, Tampa, FL 33607 Tel: 1-888-NOKIA2U (1-888-665-4228) Part No. 9351765 01/98 Printed in Canada NOKIA and the NOKIA logo are registered trademarks of Nokia Corporation. The information contained in this User Guide was written for Nokia phone NHA-3NA. The right to make changes and improvements to any of the products described in this guide without prior notice is reserved. [. . . ]