User manual NOKIA 239

[. . . ] DESCRIPTION OF KEYS Use the phone keys as follows: On the side of phone: and Select earpiece volume. ON Press and hold to switch the phone on or off. MENU Selects menu mode. 9 (for emergency calls), and # are also used for one-touch dialing. Scrolls the memory locations. ABC Selects alpha mode/ number mode; press once to select alpha mode (i. e. to enter characters or display names), and press again to select number mode. [. . . ] HOME TYPE A NON-HOME TYPE B HOME TYPE B NON-HOME TYPE A The phone uses only the home system. The phone uses only the non-home system. *The home system depends on the current NAM selection; refer to `NAM Select (Menu 7)', page 37. 33 When you buy your phone, you may register (receive a phone number) with either or both of your local carriers. Contact the office of your home cellular phone company for information about the roaming agreements they have with other cellular phone companies. In some areas, roaming telephones are automatically recognized by the cellular system. In other areas, you must contact the cellular phone operator before the system can recognize your phone. The company needs to know your telephone number, the ESN (Electronic Serial Number) of your phone, and how you plan to pay for your calls. NOTE: The ESN can be found on the phone's label inside the battery compartment. To select the roaming mode: ³ Press MENU 1. (Wait for the currently selected option to appear. ) · » Press or prefer. to select the roaming mode you Press STO to confirm the setting. The phone will use this setting in a few seconds. For the function of the ROAM indicator on the display, refer to `Display Indicators', page 7. Ringing Type (Menu 2) This function allows you to select, and demonstrate, any one of the five types of ringing tones: ­ the standard tone (STANDARD), or ­ one of four optional tones (OPTIONAL 1, 2, 3 or 4). To select the ringing tone: ³ Press MENU 2. (Wait for the currently selected option to appear. ) · » Press or to choose the type you prefer. Press STO to confirm the setting. 34 Call Timers (Menu 3) This function allows you to check the duration of the calls you have made, on the currently-selected NAM (phone number), and to reset the call timers. You may display three call timers; shown in hours, minutes and seconds: ­ Duration of the current or last call (LAST . . ­ Duration of all calls you have made on the currently active NAM except the current call (TOTAL . . ­ Non-resetable timer showing duration of all calls you have made on the currently active NAM except the current call (LIFE . . . . You can use the RESET TIMERS option to reset the LAST and TOTAL timers. To display the call timers, or reset the call timers: ³ Press MENU 3. · Press once to display TOTAL, twice to display LIFE, and three times to display RESET TIMERS. Note: LIFE timer may also be accessed by pressing and holding the MENU key for 4 seconds. To reset the call timers: ³ With the message RESET TIMERS displayed, press STO. · Enter the 5-digit security code (default 12345), and press STO. On entry of the correct code, the message TIMERS CLEARED will be displayed to confirm that the timers have been set to zero. If you entered an incorrect security code, the message CODE ERROR will appear; in this instance, repeat the above procedure. NOTE: The call timers are designed to give an approximate indication, and may not reflect actual network usage. [. . . ] Upon request from NMPI, the Consumer must provide information to reasonably prove the date of purchase. The Consumer shall bear the cost of shipping the Product to the Customer Service Department of NMPI. NMPI shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty. The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable: The Product has been subject to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of NMPI, including damage caused by shipping and blown fuses. 2. 3. [. . . ]