User manual NOKIA 232

[. . . ] DESCRIPTION OF KEYS Use the phone keys as follows: On the side of phone: and Select earpiece volume. ON Press and hold to switch the phone on or off. MENU Selects menu mode. 9 (for emergency calls), and # are also used for one-touch dialing. AB MSG ALPHA MENU Scrolls the memory locations. ABC Selects alpha mode/ number mode; press once to select alpha mode (i. e. to enter characters or display names), and press again to select number mode. [. . . ] The phone uses only the non-home system. 35 *The home system depends on the current NAM selection; refer to `NAM Select (Menu 7)', page 39. When you buy your phone, you may register (receive a phone number) with either or both of your local carriers. Contact the office of your home cellular phone company for information about the roaming agreements they have with other cellular phone companies. In some areas, roaming telephones are automatically recognized by the cellular system. In other areas, you must contact the cellular phone operator before the system can recognize your phone. The company needs to know your telephone number, the ESN (Electronic Serial Number) of your phone, and how you plan to pay for your calls. NOTE: The ESN can be found on the phone's label inside the battery compartment. To select the roaming mode: ³ Press MENU 1. (Wait for the currently selected option to appear. ) · » Press or prefer. to select the roaming mode you Press STO to confirm the setting. The phone will use this setting in a few seconds. For the function of the ROAM indicator on the display, refer to `Display Indicators', page 7. Ringing Type (Menu 2) This function allows you to select, and demonstrate, any one of the five types of ringing tones: ­ the standard tone (STANDARD), or ­ one of four optional tones (OPTIONAL 1, 2, 3 or 4). To select the ringing tone: ³ Press MENU 2. (Wait for the currently selected option to appear. ) · » Press or to choose the type you prefer. Press STO to confirm the setting. 36 Call Timers (Menu 3) This function allows you to check the duration of the calls you have made, on the currently-selected NAM (phone number), and to reset the call timers. You may display three call timers; shown in hours, minutes and seconds: ­ Duration of the current or last call (LAST . . ­ Duration of all calls you have made on the currently active NAM except the current call (TOTAL . . ­ Non-resetable timer showing duration of all calls you have made on the currently active NAM except the current call (LIFE . . . . You can use the RESET TIMERS option to reset the LAST and TOTAL timers. To display the call timers, or reset the call timers: ³ Press MENU 3. · Press once to display TOTAL, twice to display LIFE, and three times to display RESET TIMERS. To reset the call timers: ³ With the message RESET TIMERS displayed, press STO. · Enter the 5-digit security code (default 12345), and press STO. On entry of the correct code, the message TIMERS CLEARED will be displayed to confirm that the timers have been set to zero. If you entered an incorrect security code, the message CODE ERROR will appear; in this instance, repeat the above procedure. NOTE: The call timers are designed to give an approximate indication, and may not reflect actual network usage. The current timer does not update during a call. Lights Control (Menu 4) This function allows you to select the operation of the keyboard and display illumination. [. . . ] The Mobile Holder should be mounted on the Cable Junction Box (JBH-1), in a convenient place. The phone will now operate normally with the following additional features: ­ When the phone is placed in the Mobile Holder, it will operate automatically in handsfree mode. ­ When removing the phone from the Mobile Holder, it will change from handsfree to normal handset operation. When the phone is connected to the Kit, the menu functions for Lights Control, Keypad Tones and Ringing Volume will be different from those available in normal handportable use of the phone. 66 Volume (earpiece or handsfree speaker), keypad tones and ringing volume: Independent levels for each of these functions will be stored for handset mode and for handsfree mode. [. . . ]