Detailed instructions for use are in the User's Guide.
[. . . ] It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure. A separate Warranty Information and Maintenance Log Booklet explains details about the warranties covering your vehicle and vehicle maintenance schedules. Additionally, a separate Customer Care/Lemon Law Booklet will explain how to resolve any concerns you may have with your vehicle, as well as clarify your rights under your state's lemon law. [. . . ] Intermittent changes in reception quality normally are caused by external influences. Using a cellular phone in or near the vehicle may influence radio reception quality. The control buttons are illuminated when the parking lamps or headlamps are on. Only the text for the active controls will illuminate for each specific type of media. For example when a cassette tape is being played, SHUFFLE will not illuminate. If the knob is set above a certain volume level and the ignition is turned off, the volume will come back on at a nominal listening level when the ignition is turned back on.
AHA1058
AM-FM RADIO WITH CASSETTE PLAYER AND COMPACT DISC PLAYER RADIO OPERATION
To turn the radio on, turn the ignition key to ACC or ON. If you listen to the radio with the engine not running, turn the key to the ACC position. Radio reception is affected by station signal strength, distance from radio transmitter,
Clock operation
The clock is on in the display regardless of what mode, media, or function the radio is in as long as the ignition is in ACC or ON.
4-22 Heater, air conditioner and audio systems
Clock set
Press the RDS/CLK button until SELECT HOURS is displayed then use the SEL buttons to change the hour, press the RDS/CLK button again until SELECT MINS is displayed then use the SEL buttons to change the minutes. The display will return to the previous radio station, tape or CD that was being played previous to setting the clock in 7 seconds or you may press the RDS/CLK button until the previous display appears.
TUNING
WARNING The radio should not be tuned while driving in order that full attention may be given to the driving operation.
Auto set
Press the AUTO button while listening to the radio to activate the auto set feature. When AUTO is depressed for less than 5 seconds, the display window momentarily indicates AUTO ON, and the radio seeks the first six strong stations for the respective band. The first six strong stations are then stored in order in memory buttons one through six. Only stations in the selected band are set, and the station seek begins from the last frequency stored in memory button six. If AM, FM, SCAN, TUNE, SEEK, AUTO or a memory button is pushed while auto set is operating, auto set is canceled and AUTO OFF shows in the display window.
vate the auto load feature. When AUTO is depressed for longer than 5 seconds, the display window momentarily indicates AUTO LOAD, and the radio seeks the first six strong stations for every band. The first six strong stations are then stored in order in memory buttons one through six for each band (AM, FM1, and FM2).
Tune buttons
Use the or buttons for manual tuning. To move quickly through the channels, hold either of the tune buttons down for more than 0. 5 seconds.
Selecting the desired band
Push the AM buttons to change to AM band or push the FM button to change to FM1 or FM2 band reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception.
SEEK tuning
Push the SEEK or buttons to find the next broadcast station. Once the highest broadcast station is reached, the radio continues in the SEEK mode at the lowest station. Once the lowest broadcast station is reached, the radio continues in the SEEK mode at the highest station.
Auto load
Press the AUTO button for longer than 5 seconds while listening to the radio to acti-
Heater, air conditioner and audio systems 4-23
SCAN tuning
Push the SCAN tuning button, SCAN illuminates in the display. SCAN tuning begins from low to high frequencies and stops at each broadcasting station for 5 seconds. Pushing the button again during this 5 second period stops SCAN tuning and remains tuned to that station.
FM1, or FM2. If the battery is disconnected, or if the radio fuse opens, the radio memory is canceled. [. . . ] 10-9 Remote keyless entry system (See multi-remote control system) . . . . . . . . . . . . . . 3-9 Removing and installing the second row bench seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-70 Five passenger seating with cargo room. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15 Three-passenger bench seat in fully forward position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]