User manual NAIM FLASH REMOTE HANDSET

[. . . ] UPDATE NOTES Flash Remote Handset ISSUE 2 Introduction These update notes provide detailed operating instructions for the Naim Audio Flash Remote Handset, software version RCc01-02. If you have received these notes as part of a software update pack you must first read Appendix 1 ­ Software Update Procedure and follow the instructions to update your handset with the latest software. Operation Introduction The New Flash Remote Handset provides the following features: · Preamp, CD, Tuner, AV processor, DVD and Subwoofer control functions. The following sections provide detailed instructions for using and setting up your Flash. [. . . ] Numeric keys 0, 7, 8 and 9 are disabled. Setup Mode Setup mode is used to adjust the Flash handset setup. Use the UP (5)/ DOWN (6) keys to select a setup page and the OK (OK) key to accept, or EXIT (EXIT) to exit setup. To return to normal operation at any point within the setup menu press and hold the EXIT (EXIT) key. General The general setup menu is used to adjust lights, contrast, avrc5 and dvd-rc5 settings. Use the UP (5)/ DOWN (6) keys to scroll through the setting displayed on the left, and press OK (OK) to select. Then use the UP (5)/ DOWN (6) keys to 4 adjust the current settings displayed on the right, and press OK (OK). auto ­ on whenever the handset is awake AND the ambient light level is low (default). av-rc5 The AV-rc5 setting selects which AV code set to use from 0-9 (0 default). As the code set is changed a code set change command is transmitted to the AV processor to synchronize the handset and the processor. WARNING This setting should only be adjusted in conjunction with the appropriate AV processor system code setup procedure outlined separatelty. dvd-rc5 The dvd-rc5 setting selects which DVD code set to use from 15 (1 default). As the code set is changed a code set change command is transmitted to the DVD player to synchronize the handset and the player. WARNING This setting should only be adjusted in conjunction with the appropriate DVD player system code setup procedure outlined separatelty. 5 Softkeys The softkey setup menu allows alternate commands to be assigned to any of the 8 softkeys on each of the 13 predefined product pages. To assign a softkey, select the required product page using the OK (OK) key (press EXIT (EXIT) at any time to return to the instructions page). The UP (5)/ DOWN (6) keys can then be used to select any one of the available commands (see appendix 2). Each command has a product ID to indicate which product the command controls according to the following key: p-preamp, r-record, c-cd, t-tuner, a-av, d-dvd, s-sub. If a command for a product other than the selected page product is chosen, the product ID will be displayed in the main display. [. . . ] Place the barbed end into the opposite recess and lever the PIC fully out of the socket. Apply mild pressure to push the PIC into the socket so that it is flush to the top of the socket. Your Flash handset has now been updated. 8 Appendix 2 ­ Command Codes (none) vol5-p vol6-p mute-p mon-p bal4-p 3bal-p disp-p prog-p i/p5-p i/p6-p 1-p 2-p 3-p 4-p 5-p 6-p 7-p 8-p 9-p 0-p mute-r mon-r i/p5-r i/p6-r 1-r 2-r 3-r 4-r 5-r 6-r 7-r 8-r 9-r 0-r play-c stop-c next-c prev-c pause-c rw-c ff-c rep-c disp-c prog-c open-c 1-c 2-c 3-c 4-c 5-c 6-c 7-c 8-c 9-c 0-c down-t up-t mode-t mono-t disp-t prog-t 1-t 2-t 3-t 4-t 5-t 6-t 7-t 8-t 9-t 0-t s/b-a vol5-a vol6-a mute-a i/p5-a i/p6-a m5-a m6-a midn-a osd-a disp-a menu-a enter-a clear-a input-a spkr-a 5-a 6-a 4-a 3-a i/p1-a i/p2-a i/p3-a i/p4-a i/p5-a i/p6-a i/p7-a i/p8-a i/p9-a i/p0-a m1-a m2-a m3-a m4-a m5-a m6-a m7-a m8-a m9-a m0-a s/b-d open-d setup-d play-d stop-d next-d prev-d pause-d ff-d rw-d slow-d rep-d title-d menu-d return-d clear-d zoom-d angle-d subt-d audio-d mem-d 1-d 2-d 3-d 4-d 5-d 6-d 7-d 8-d 9-d 0-d prog-d disp-d 5-d 6-d 4-d 3-d ok-d disp-s info-s 1-s 2-s 3-s 4-s 5-s 6-s mute-s gain5-s gain6-s mode5-s down-s save-s up-s mode6-s 9 Appendix 3 ­ Product Commands Use the following images to note changes to softkeys for future reference. Preamp Default User CD Default User 10 Tuner Default User AV Default User 11 DVD Default User Subwoofer Default User 12 Naim Audio Limited, Southampton Road, Salisbury, England SP1 2LN Telephone: +44 (0) 1722 332266 Fax: +44 (0) 1722 412034 www. naim-audio. com Part No. [. . . ]