User manual MINOLTA MAXXUM 600SI

[. . . ] The CM-700d and CM-600d models will change the way portable spectrophotometers are perceived and applied in Research & Development and QualityControl by improving usability and convenience. Experience impressive colour measurement! Measure anything anywhere. With the CM-700d and CM-600d you can measure any sample anywhere!The ergonomic vertical alignment is perfectly suited to position and measure round or even concave shaped parts and samples with single hand operation. Weighing only 550 g, the CM-700d and CM-600d are the most lightweight instruments in their class and thus allow excellent portability for on-site measurement. [. . . ] The measuring aperture is selectable between Ø 8 mm and Ø 3 mm to measure even small sample sizes (CM-700d only). Communicate wireless. The CM-700d and CM-600d are the world's first portable colour measuring instruments enabling wireless data communications with an external PC or a Printer using Bluetooth ® class 1 technology. This brings a new dimension of freedom of operation to portable colour measurement in production eliminating the usual cable tangle associated with conventional instruments. Bluetooth® data communications with the new models can work at distances up to 100m including bidirectional communications displaying PASS/FAIL message or colorimetric data. In stationary mode, the instruments also offer communications via a USB port. See colours in colour. The CM-700d and CM-600d are the world's first portable colour measuring instruments with a colour LCD screen to improve colour data reading & perception. The 2. 36-inch bright TFT display shows colour readings both in numerical or graphical mode to improve operability and understanding. Pseudo colour simulations to express colour difference or metamerism are also possible for rapid visual indication. Easy to operate. The CM-700d and CM-600d also set new standards in ease of use and intuitive operation. Five dedicated buttons for the most important operations and displayed menu guidance in 6 languages make it easy to navigate through all functions and features. 2, 000 measurements with full charge * Stand-alone continuous measurement fixed to either SCI or SCE mode at 10-second intervals at 23°C MAV: ø 8 mm/ ø 11 mm SAV: ø 3 mm/ ø 6 mm * Changeable by replacing target mask and selecting lens position MAV: ø 8 mm/ ø 11 mm only Spectral reflectance: Standard deviation within 0. 1%, Chromaticity value: Standard deviation within E*ab 0. 04 * When a white calibration plate is measured 30 times at 10-second intervals after white calibration Within E*ab 0. 2 (MAV/SCI) * Based on 12 BCRA Series II colour tiles compared to values measured with a master body at 23°C 1 to 10 (Auto averaging), 1 to 30 (Manual averaging) 2. 36-inch TFT colour LCD USB1. 1; Bluetooth® standard version 1. 2* 2° observer or 10° observer A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (Simultaneous evaluation with two light sources possible) Spectral values/graph, colorimetric values, colour difference values/graph, PASS/FAIL result, pseudocolour, colour assessment L*a*b*, L*C*h, Hunter Lab, Yxy, XYZ, Munsell, and colour difference in these spaces (except for Munsell) MI, WI(ASTM E313-73/E313-96), YI(ASTM E313-73/ASTM D1925), ISO Brightness, 8° gloss value E*ab (CIE1976), E*94 (CIE1994), E*00 (CIE 2000), CMC (l: c) Measurement data: 4, 000 sets / Target colour difference data: 1, 000 sets Tolerances can be set to colorimetric values (excluding Munsell), colour difference values, colour values (excluding 8° gloss value) respectively Special AC adapter; 4 AA-size alkaline dry batteries or nickel-metal-hydride rechargeable batteries 73 (W) x 211. 5 (H) x 107 (D) mm Approx. 550 g (without white calibration cap and batteries) 5 to 40°C, relative humidity 80% or less (at 35°C) with no condensation 0 to 45°C, relative humidity 80% or less (at 35°C) with no condensation * Applicable Bluetooth® profile: Serial Port Profile, Output: Bluetooth® Power Class 1. The communication distance may vary depending on the obstacles and radio wave conditions between the devices. Successful wireless communication is not guaranteed with all Bluetooth®-ready equipment. · Bluetooth® is a registered trademark of Bluetooth SIG, Inc. and is used under license agreement. <System Configuration> AC Adapter AC-A305 CM-700d / 600d Wrist Strap CR-A73 Bluetooth® Printer (commercial product) Bluetooth® Adapter (commercial product) * For information on compatible products, please contact your Konica Minolta Sensing sales representative. Personal computer (commercial product) USB cable IF-A 17 (2 m) CM-700d CM-600d Target Mask Target Mask ø 8 mm (with glass) CM-A1 83 ø 3 mm CM-A1 79 (w/ plate) Dust Cover Set CM-A1 85 Replacement Dust Cover (Polyolefine) CM-A1 86 ø 8 mm CM-A1 78 (w/ plate) White Calibration Cap CM-A1 77 Zero Calibration Box CM-A1 82 Hard Case CM-A176 * For storage Colour Data Software CM-S100w Standard accessories Optional accessories ø 8 mm CM-A1 80 (w/o plate) ø 3 mm CM-A1 81 (w/o plate) Granular-Materials Attachment CM-A184 SAFETY PRECAUTIONS For correct use and for your safety, be sure to read the instruction manual before using the instrument. · Always connect the instrument to the specified power supply voltage. [. . . ] and is used under license agreement. <System Configuration> AC Adapter AC-A305 CM-700d / 600d Wrist Strap CR-A73 Bluetooth® Printer (commercial product) Bluetooth® Adapter (commercial product) * For information on compatible products, please contact your Konica Minolta Sensing sales representative. Personal computer (commercial product) USB cable IF-A 17 (2 m) CM-700d CM-600d Target Mask Target Mask ø 8 mm (with glass) CM-A1 83 ø 3 mm CM-A1 79 (w/ plate) Dust Cover Set CM-A1 85 Replacement Dust Cover (Polyolefine) CM-A1 86 ø 8 mm CM-A1 78 (w/ plate) White Calibration Cap CM-A1 77 Zero Calibration Box CM-A1 82 Hard Case CM-A176 * For storage Colour Data Software CM-S100w Standard accessories Optional accessories ø 8 mm CM-A1 80 (w/o plate) ø 3 mm CM-A1 81 (w/o plate) Granular-Materials Attachment CM-A184 SAFETY PRECAUTIONS For correct use and for your safety, be sure to read the instruction manual before using the instrument. · Always connect the instrument to the specified power supply voltage. Using improper batteries may cause a fire or electric shock. The specifications and drawings given here are subject to change without prior notice. [. . . ]