User manual MIELE W 3033

[. . . ] Operating and Installation Instructions Washer W 3033 To prevent accidents and machine damage, read these instructions before installation or use. UV M. -Nr. 52 3 IMPORTANT SAFETY INSTRUCTIONS , WARNING - To reduce the risk of fire, electric shock or injury to persons while using your appliance follow basic safety precautions, including the following: Read all instructions before using the appliance. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipmentgrounding conductor and a grounding plug. [. . . ] ^ Activate the Child Lock so children or animals do not find their way into the drum. ^ Shut off the water supply if the washer will not be used for a longer period of time, e. g. vacationing. 24 Using the washer Cancelling a program A program can be cancelled any time after the program start. Interrupting a program ^ Turn the washer off. To continue: ^ Turn the washer on again. Changing a program A program change is not possible once the program has started. The program must be cancelled. Adjusting the temperature The temperature can be changed up to 6 minutes after the program start. ^ Press and hold the "Cancel" button until the display shows: Cancel Adjusting the spin speed The spin speed can be adjusted anytime until the beginning of the final spin. Adjusting the options The wash water will be drained away. The options "Extended" or "Sensitve" can be selected or deselcted up to 6 minutes after the program start. The "Buzzer" option can be selected or deselected at any time. 25 Using the washer Adding/removing laundry during a wash program ^ Press and hold the door button until the door opens. Note: Once the program has started the washer can not make adjustments of the load size. The drum door can not be opened if: ­ the water temperature is greater than 130°F (55°C). If you attempt to open the door while the washer is in one of the above statuses "Machine locked" will appear in the display. X Machine locked 26 Cleaning and care , Before cleaning or maintenace, disconnect the power supply by unplugging the unit or manually "tripping" the circuit breaker. Cleaning the detergent drawer Detergent residue should be cleaned out regularly. , Do not use a hose to wash down the washer. Cleaning the exterior and control panel ^ Clean the exterior of the washer with a mild solution of non-abrasive detergent or soap and water, and wipe dry with a soft cloth. ^ Clean the drum with a stainless steel cleaner specially formulated for use in a washing machine, available from Miele. ^ Pull out the detergent drawer as far as it goes. Press down on the red release lever and pull the drawer out of the machine. ^ Clean the detergent drawer with warm water. , Do not use chemical solvents, abrasive cleaners, glass or all purpose cleaners!They will damage the surface. Cleaning the drum ^ It is recommended to run a program once a month without laundry using a "Hot" or "Sanitize" temperature or to use bleach. 27 Cleaning and care ^ Clean the siphon tube. Remove the siphon tube from the compartment § and rinse under warm water. Replace the siphon tube. ^ Using a bottle brush remove any detergent or lime deposits from the water inlet valves at the top of the detergent drawer niche. Cleaning the liquid detergent inserts Clean the siphon tube and fabric softener channel more often when frequently using liquid starch. Liquid starch tends to stick. ^ Push the insert apart and remove the siphon for easy cleaning. 28 Quick guide Remove this guide for easy reference Please read all instructions, especially the "Important Safetey Instructions", before using the washer. Quick guide 1. Turn on the washer ^ Press the program button of the desired program. Selecting a temperature The preselected temperature and/or spin speed can be adjusted if the program allows so. ^ Press the "On/Off" button. Load the laundry Duration: 1:02 h y Warm High spin By pressing the left button the temperature will be adjusted. [. . . ] Tips for a hot water connection The hot water temperature from the hot water valve must not exceed 140°F (60°C); the ideal temperature is 130°F (55°C). If there is no water pressure at the hot water inlet, the unit will automatically switch to cold water after several minutes. 48 Plumbing Drainage The 5 foot (1. 5 m) drain hose may be connected as follows: 1. Directly into a sink: hook the hose over the edge of the sink and secure it firmly (e. g. To a stand pipe: place the drain hose into a 1 ½" (4 cm) stand pipe and secure it firmly. [. . . ]