User manual MIELE H 6660 BP

[. . . ] The cardboard box and packing materials protect the appliance during shipping. Old electrical and electronic appliances often still contain valuable materials. [. . . ] Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. 2 m) in length with a NEMA 14-30 P plug ready for connection to the power supply: The voltage can be adjusted (see "Settings - Electrical Version"). Only operate the appliance after it has been installed into cabinetry. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances. wARNING: THIS APPLIANCE MUST BE GROUNDED Installer: Please leave these instructions with the consumer. Discuss your installation requirements with your architect, designer and installer. Cut-out (4" x 22" / 100 mm x 560 mm) in the bottom of the cabinet for power cord and ventilation Power cord with plug * Oven with glass front ** Oven with metal front Front design may vary depending on model. Installation into a tall cabinet Cut-out (4" x 22" / 100 mm x 560 mm) in the bottom of the cabinet for power cord and ventilation Power cord with plug * Oven with glass front ** Oven with metal front Front design may vary depending on model. The oven must not be operated The oven must have an adequate supply of cool air for proper operation. The required air must not be heated excessively by other heat sources, e. Observe the following when installing: Build into cabinetry with no back wall. Make sure that the shelf that the appliance sits on does not touch the wall. [. . . ] Reinstall the door, if necessary (see "Cleaning and care - Installing the door"). Please have the model and serial number of your appliance available before contacting Technical Service. [. . . ]