User manual MIDLAND GXT325
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MIDLAND GXT325. We hope that this MIDLAND GXT325 user guide will be useful to you.
Manual abstract: user guide MIDLAND GXT325
Detailed instructions for use are in the User's Guide.
[. . . ] It is a quality piece of electronic equipment, skillfully constructed with the finest components. The circuitry is all solid-state and mounted on a rugged printed circuit board. Your two-way radio is designed for reliable and trouble-free performance for years to come. [. . . ] When the battery pack reached a substantial voltage level, the LED indicator will change to GREEN color . However, this does not ensure that the battery pack is fully charged so it is recommended that the battery pack be charged for at least 12 hours. Do not attempt to charge alkaline batteries or any batteries or battery packs other than the one indicated in the manual. For long term storage of the radio, turn the radio OFF and remove the batteries from the radio.
!
LOW BATTERY LEVEL INDICATOR
Your GXT300/325/400/450 Series has a LOW BATTERY ICON which will only appear on the LCD display if the battery voltage level is low. At this point, the battery needs to be charged for at least 12hrs.
Page 7
www. midlandradio. com
Model GXT300/325/400/450 Series
®
GXT300/325 SERIES QUICK REFERENCE CHART
MENU Channel Privacy Power eVOX
Roger Beep Call Tone
Silent Operation
1~22
oF~38
H/L
oF/1/2
On/Off
1~3
On/Off
GXT400/450 SERIES QUICK REFERENCE CHART
MENU Channel Privacy Power eVOX Vibrate
Roger Beep Call Tone
Silent Operation
Press & hold Menu button
1~22 WX Channel
oF~38
H/M/L
oF/1/2
On/Off
On/Off
1~5
On/Off
1~10
MONITOR Pressing and holding the MONITOR button for 1 second will let you hear noise so you can adjust the volume level of the radio when not receiving a signal. This should be used to check activity on your current channel before transmitting. Press and hold the MONITOR button for 1 second again to get out of MONITOR mode. SCAN Your GXT300/325/400/450 Series can scan all 22 channels for activity. Your radio will rapidly scan each of the 22 channels and stop on any active channel for 5 seconds before resuming scan. When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel. To resume scanning, quickly press the SCAN button.
Page 9
www. midlandradio. com
Model GXT300/325/400/450 Series
®
!!
SETTING PRIVACY CODES Your GXT300/325/400/450 Series has 38 Privacy codes available. To select a Privacy Code for the current channel press the MENU button twice, and then the / buttons to select one of the 38 Privacy Codes. To confirm the selection, press the PTT button or press MENU button again to move to the next feature setting. [. . . ] The display shows "VOX" blinking while on the right of the CHANNEL NUMBER display, an "oF" icon appears. Select "1" or "2" by pressing the / buttons and push the PTT key, or press MENU button again to move to the next feature setting. eVOX will be more sensitive on the "2" setting than on the "1" setting. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MIDLAND GXT325
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MIDLAND GXT325 will begin.