User manual MEMOREX MVD-2026

[. . . ] USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. [. . . ] L-MONO: Select this to set the Dolby Digital output to left mono mode, meaning it will reproduce the left mono signal to the Left and Right channels. R-MONO: Select this to set the Dolby Digital output to right mono mode, meaning it will reproduce the right mono signal to the Left and Right channels. MIX-MONO: Select this to reproduce both channels mixed together. 20 Select Preference and then select the desired option using the Navigation (, ®, , ) buttons to navigate through the menus/screens and press the OK button to select. PREFERENCE MENU (this menu cannot be accessed if a disc is inserted): AUDIO DVD SETUP MENU (CONTINUED) 1 SUBTITLE 1 DISC MENU Select the language the DVD will be played back in (ENGLISH, FRENCH, SPANISH, GERMAN, JAPANESE). The DVD must be recorded in the selected language, otherwise the default language of the DVD will be played. Select the language the Subtitle (OSD) will be in (ENGLISH, FRENCH, SPANISH, GERMAN, JAPANESE, OFF). The DVD must be recorded in the selected language, otherwise the default language of the DVD will be shown. 1 DEFAULT 1 Select the language the DISC MENU will be in (ENGLISH, FRENCH, SPANISH, GERMAN, JAPANESE). The DVD's DISC MENU must be made in the selected language, otherwise the default language of the DVD will be shown. Select this option to reset all preferences to their original factory settings. 21 The SETUP MENU lets you customize the VCR section by allowing you to set various options, such as clock, program, channels and more. VCR SETUP MENU While in the VCR mode (VCR button pressed first) enter the SETUP MENU by pressing the SETUP button 1. Use the Navigation (, ®, , ) buttons 2 to navigate through the menus/screens and press the OK button 3 to select the highlighted option. To Exit the SETUP MENU, press the SETUP button 1. 3 1 2 TO SET THE DATE AND TIME 1 2 Enter the VCR mode and the Setup screen as described above; the Setup menu will appear. Press the OK button to select Clock Set; the Clock Set menu will appear. 1 Enter two digits for the month, two digits for the day and two digits for the year using the Number buttons. When finished, the hour digits will blink. 3 4 3 1 2 Enter two digits for the hour and two digits for the minute using the Number buttons. When finished, the AM/PM setting will blink. Press the Number 1 button 1 for AM or the Number 2 button 2 for PM. When finished, the first available channel will appear on screen. ) NOTE: To cancel searching, press the SETUP button 3 . Press the Navigation () button 1 to select the Manual Set option. Press the Number buttons 2 to enter the channel number which you want to Add or Erase. Press the OK button 3 repeatedly to select "Add" or "Erase". Add­channels that are added can be accessed using the Navigation/Channel Up/Down (, ) buttons 1. Erase­channels that are erased cannot be accessed using the Navigation/Channel Up/Down (, ) buttons 1. NOTE: For CABLE, to enter a channel number over "99", press the 100 button first, then enter the second and third digits of the channel number; i. e. , for Channel 105, press the 100 button, then press the "0" and "5" Number buttons. 25 SETTING THE LANGUAGE VCR SETUP MENU (CONTINUED) 1 2 2 Enter the VCR mode and the Setup screen as described on page 22; the Setup menu will appear. Press the OK button 2 to select it; the Language Select menu will appear. 1 1 Press the Navigation () button to select the desired language the On-Screen Display will be in (English, Spanish or French). 3 When finished, press the OK button and the language will be set. NOTE: To exit the menu, press the SETUP button twice. 26 SETTING THE GO TO ZERO SEARCH VCR SETUP MENU (CONTINUED) 1 2 1 2 2 With a prerecorded video cassette tape inserted, enter the VCR mode and the Setup screen as described on page 22; the Setup menu will appear. Press the OK button 2 to select it; the Search will appear. 1 Press the Navigation () button 1 to select Go To Zero Search, then press the OK button 2; the VCR will then search until the counter reads "0:00:00". When it reaches "0:00:00", playback will start automatically. 1 1 SETTING THE COUNTER SEARCH 1 2 1 1 2 2 With a prerecorded video cassette tape inserted, enter the VCR mode and the Setup screen as described on page 22; the Setup menu will appear. Press the OK button 2 to select it; the Search will appear. Press the Navigation () button 1 to select Counter Search, then press the OK button 2; the Counter Search menu will appear. 1 1 3 2 NOTE: When searching, press the STOP s button to cancel the searching. 1 Enter the desired counter number to go to using the Number buttons 1. [. . . ] Try another VCD. POSSIBLE SOLUTION If you connect a TV that is not compatible Slide the PROGRESSIVE SCAN switch with a progressive scan signal and set to the OFF position if your set is not the PROGRESSIVE SCAN switch to ON, compatible, the picture should you will not be able to see any picture. Timer recording does not work. TROUBLESHOOTING GUIDE (VCR SIDE) POSSIBLE SOLUTION Connect the AC power cord to the AC outlet. Insert a video cassette. POSSIBLE CAUSE The AC power cord is not connected. Cassette is not inserted. The video cassette's erase prevention tab is broken off. [. . . ]