User manual MCINTOSH MXA60

[. . . ] McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www. mcintoshlabs. com MXA60 60th Anniversary Integrated Audio System Owner's Manual The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING - TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. Use of controls or adjustments or performance of procedures other than those specified in the Owners Manual may result in Hazardous Radiation Exposure. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. To prevent the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. The Caution Label below is located inside the apparatus on the top of the laser transport LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT VAROITUS! Laitteen kayttaminen muulla kuin tassa kayttoohjeessa mainitulla tavalla saattaa altistaa kayttajan turvallisuusluokan 1 ylittavalle nakymattomalle lasersateiiylle. [. . . ] Refer to figure 4. Note: The Front Panel Upper Display will indicate MXA60 V1. 00 or higher for the first time. After the first time it will display the Setup Mode Menu item last accessed. Default Settings Function Name VERSION SOURCE NAME 1 Setting V_. _ _ INPUT 1 INPUT 2 INPUT 1 INPUT 2 MXA60 TM3_ _ _ _ _ _ _ NONE ______ ON Page No. 23 23 23 24 24 24 25 25 SOURCE LEVEL1 SPEAKERS TUNER TYPE TUNER CLEAR PRESETS TUNER REGION TUNER TEXT 1 3. To exit from the Setup Mode, press the INPUT/ TRIM Control (inner knob). Refer to figure 3. Default Settings The Default Settings Chart below indicates the Function Name, Default Setting and the Page Number for additional information. In order to change the Source Name and Level for Input 1 and Input 2, either Input needs be selected before entering the Setup Mode. SOURCE: CD TUBE WARMUP Figure 1 SOURCE: TUNER FM 30% Figure 2 91. 5 MHz WWWW-FM Figure 3 ST ¦ SETUP: VERSION MXA60 V1. 00 Figure 4 22 Figure 5 Setup Firmware Version The MXA60 functionality is controlled by internal software that is know as Firmware. The Version of the Firmware in the MXA60 can be identified at any time by utilizing the Setup Mode. Press and hold in the INPUT/TRIM Control (inner knob) until the Setup Mode is active. The Front Panel Information Display will indicate "SETUP: VERSION MXA60 V_ . Proceed to "Source Name1" or exit from the Setup Mode, by pressing the INPUT/TRIM Control (inner knob). The Front Panel Information Display will revert back to its normal display. Rotate the INPUT/TRIM Control (inner knob) to select Tuner FM and tune to a station. Rotate the INPUT/TRIM Control (inner knob) to select Input 1 (Music Server) and note the volume level. Press and hold in the INPUT/TRIM Control (inner knob) until the Setup Mode is active. Rotate the INPUT/TRIM Control (inner knob) to select "LEVEL: 0dB. Refer to figure 9. SETUP: SOURCE NAME INPUT1: -> SNPUT1 Figure 7 6. Rotate the TUNE/TRIM Control (outer knob) to select the "N" of the title "Input 1". Slowly rotate the VOLUME Control until the character "E" appears instead of the "N". Repeat the method used in steps 6 and 7 until the word "Input 1" is replaced with the word "Server". Refer to figure 8. Source Name1 The MXA60 allows for renaming (up to eight characters long) of the two External Inputs to match the components in your system. Press and hold in the INPUT/TRIM Control (inner knob) until the Setup Mode is active. Rotate the INPUT/TRIM Control (inner knob) to select "SETUP: SOURCE NAME". Refer to figure 6. SETUP: SOURCE NAME INPUT1: -> SERVER Figure 8 LEVEL: INPUT1 Min || Figure 9 0. 0dB Max 9. Proceed to "Source Level " or exit from the Setup Mode, by pressing the INPUT/TRIM Control (inner knob). [. . . ] Figure 85 02:13 How to Pause a Disc This feature allows for the temporary stopping of disc playback. When playing a Disc, press the /; PLAY/ PAUSE Push-button on the Front Panel of the Figure 86 MXA60 or ;/TUN Push-button on the Remote Control Push-button to temporarily stop playback. 02:46 Figure 74 34 Note: The MXA60 must be in STOP Mode with the Disc Loaded and the Table of Contents read before the Random Playback Mode Feature can be activated. How to Operate the SACD/CD Player, con't 1. With a disc loaded and not playing, press the RANDOM Push-button, "RND" will be indicated in the Information Display. Press the /; PLAY/ PAUSE Push-button on the Front Panel of the MXA60 or ;/ Figure 87 TUN Push-button on the Remote Control to start Random Playback. [. . . ]