User manual MAXI-COSI PRIORI

[. . . ] € The Maxi-Cosi Priori Side Protection System may be used in the front seat and in the back seat. If this is not possible, make sure that, if installing on a front seat equipped with an airbag, the seat is in the rearmost position. See the car manual, as more and more cars have the possibility to easily switch off the airbag. € The Maxi-Cosi Priori Side Protection System has been approved according to the strictest European safety standards (ECE R44/04) and is suitable for children weighing 9 to 18 kg (approx. [. . . ] Other instructions • The Maxi-Cosi Priori Side Protection System must not be used without the cover. Always use an original Maxi-Cosi Priori Side Protection System cover, as the cover contributes to the safety of the seat. € The seat must always be secured with a seat belt, even when not in use. An unsecured seat may injure other passengers in the car in the event of an emergency stop. € Ensure that the seat is not damaged by wedging it between or underneath heavy luggage, adjustable seats or slamming the car door etc. Qxd:Priori 1 SPS GBA DRU0629 bw 23-7-10 11:57 Pagina 8 EN • No alterations may be made to the Maxi-Cosi Priori Side Protection System as this could affect part or the overall safety of the seat. € In hot weather the plastic and metal parts of the Maxi-Cosi Priori Side Protection System may feel hot to the touch. € In order to prevent damage to the cover, do not remove the Maxi-Cosi Priori Side Protection System logo. € Use the seat even on short journeys as this is when most accidents occur. € Take short breaks on longer journeys so that your child has some freedom of movement. € Tell your child that he/she should never play with the belt buckle. € If you are not able to fasten the harness belt properly or pull it tight, contact your supplier immediately. Adjusting the height of the shoulder belts (C-E) The correct belt height of the shoulder belts is attained when the belt disappears into the shell slightly above the shoulder of the child. Make sure that the shoulder belts fit properly over the shoulders of the child (C8). Loosen the shoulder belts by pressing the release button and pulling the shoulder belts towards you as far as possible (C1). Place the Maxi-Cosi Priori Side Protection System in the sleeping position (A) and open the belt guard door (D1). Pull the shoulder belts through the shell and the cover out of the belt pads, but make sure that the buckle remains fixed to prevent the belts twisting (D3). If you wish to alter the belts from or to the lowest position, place the Maxi-Cosi Priori Side Protection System in the sleeping position (A). If you wish to alter the belts from or to the middle or highest position, place the Maxi-Cosi Priori Side Protection System in the sitting position (A). Loosen the top part of the cover (D4) and thread the belt pads through the cover and the shell (D5). From the front thread one belt pad through the correct slot in the cover and shell (D6). Thread the shoulder belts through the adjusted belt pads, the cover and the shell (D8-D9). [. . . ] After washing attach the belt pads (D6-D9) and place the cover on the shell. Thread the buckle and buckle sections back through the cover and fasten the cover at the release button/positioning handle (E3). Close the buckle (C5) and thread the belts through the belt pads, the cover and the shell (D9). Attach the shoulder belts to the belt yoke and make sure that the red stitching (x3) on the belt ends and the belt yoke EN Instructions for use 9 DRU0629 bw. [. . . ]