User manual MAXI-COSI AXISS

[. . . ] To maximize the guarantee, you can register your Maxi-Cosi Axiss at www. During the development of the Maxi-Cosi Axiss, we paid special attention to safety, ease of use, comfort and design. As a result of this, this product fulfils the most stringent safety requirements. Studies have shown that a large percentage of child car seats are not used correctly. [. . . ] Release the seat belt buckle (a), and remove the seat belt from the upper belt guide (b) and the lower belt guides on the car seat's base. IMPORTANT: Even when the car seat is not occupied by a child, it should still be secured into the car according to the instructions. Car seats that are incorrectly secured can pose a danger to fellow passengers. To make placing the child into the car seat easier, use the handy belt hooks on the sides of the car seat (a). Before placing the child into the seat, fix the shoulder belts to the hooks. Place the child into the car seat, then remove the belts from the hooks. Slide the buckle sections (a) + (b) together and place them into the buckle until you hear a clear "click" sound. Pull on the adjustable belt and then pull the whole belt system tight. - Note: Do not leave more than one finger's width of space between the child and the belt system. Slack of just one finger's width will make it virtually impossible for the child to free his/her arms from underneath the shoulder belts. The belt system should be adjusted according to the height of the child. * The shoulder belts of the harness should be adjusted so that they are level with the child's shoulders (see diagram). Push the adjuster button (a) and simultaneously pull the shoulder belts (b) to loosen the belt system (make sure to pull the belts and not the belt pads). When the headrest is in the desired position, press it back to lock it into position. 28) Adjusting the car seat The Maxi-Cosi Axiss can be adjusted to 6 different positions from sitting to semi-reclining - Push the button on the front of the seat shell and simultaneously adjust the position of the seat backwards or forwards to the desired sitting/reclining position. Refer to the washing label before cleaning the fabric cover (the washing label is stitched to the cover). IMPORTANT: do NOT remove other parts from the car seat, such as the EPS/polystyrene or other foam material from underneath the fabric cover. When re-attaching the cover, it is very important that the harness belts are not twisted. The harness belts should be placed underneath the cross beams on the rear of the car seat. Before placing the child back into the car seat, you should check that the belt system is working correctly. If you have any doubt you should contact the retailer of the car seat. Tip: It is wise to buy an extra cover when purchasing the Maxi-Cosi Axiss so that you can continue to use it even when the cover is being washed and dried. [. . . ] The manufacturer cannot be held liable for any damage that occurs as a result of these. To ensure optimum and safe use of car safety seats, they should not be used for longer than 5 to 6 years after the date of purchase. ageing of the plastic , for instance under the influence of sunlight (UV) , may quite unnoticeably reduce the qualities of the product. Once the child has grown out of the seat, we advise you to stop using the car seat and to dispose of it accordingly. [. . . ]