User manual MARANTZ SR7000

[. . . ] Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. [. . . ] 3. 2. Press the OK/ENTER button to enter the selection. PL x MUSIC PARAMETER :DEFAULT 3. PARAMETER PANORAMA :OFF DIMENSION :0 CENTER WIDTH: 3 TRUBASS SRS DIALOG RETURN NEXT EXIT RETURN NEXT EXIT PARAMETER: Select "DEFAULT" or "CUSTOM" with the 1 or 2 cursor buttons. If you select "CUSTOM", you can adjust three parameters as listed below. PANORAMA: Select the PANORAMA mode "ON" or "OFF" with the 1 or 2 cursor buttons. Panorama wraps the sound of the front left and right speakers around you, for an exciting perspective. DIMENSION: Set the DIMENSION level between ­3 and +3 level in 1 level intervals with the 1 or 2 cursor buttons. This can be useful to help achieve a more suitable balance from all the speakers with certain recordings. CENTER WIDTH: Set the CENTER WIDTH level between 0 and 7 in 1 level intervals with the 1 or 2 cursor buttons. Center width allows you to gradually spread the center channel sound into the front left and right speakers. At its widest setting, all the sound from the center is mixed into the left and right speakers. This control may help achieve a more spacious sound or a better blend for the front image. RETURN NEXT EXIT 4. TRUBASS: Set the TRUBASS level between 0 and 6 in 1- level increments with the 1 or 2 cursor buttons. TRUBASS produced by the speakers are an octave below the actual physical capabilities of the speakers adding exciting, deeper bass effects. PREFERENCE" from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button. 5. PREFERENCE MULTI ROOM DC TRIGGER STANDBY : BILINGUAL : HDMI AUDIO: SETUP SETUP A 1 B 2 NORMAL MAIN ENABLEH DC TRIGGER SETUP DC TRIG-1:DISABLE TV TV : TAPE : DVD : CD/R : VCR1 : AUX2 : DSS : TUNER : AUX1 : 7. 1CH : MULTI ROOM SETUP A VIDEO :DVD AUDIO :DVD SLEEP :OFF MONO/ST:STEREO MULT:OFF VOL :VARI LEV :-90dB RETURN BACK MSPK: VOL : LEV : EXIT RETURN RETURN NEXT EXIT NEXT EXIT 2. Select the desired menu with the 3 or 4 cursor buttons and press the OK/ENTER button. DC DC TRIGGER SETUP TRIG-2:DISABLE : : : : : TAPE CD/R AUX2 TUNER 7. 1CH : : : : : MULTI ROOM SETUP B STAND BY: When this is set to "ECONOMY", you can reduce the power consumption when the unit is in the Standby mode. When "ECONOMY" is selected, "TV AUTO" and "RS-232C" are disabled when the unit is in the Standby mode. BILINGUAL: In the Bilingual mode, Dolby Digital and DTS output is set to either "MAIN" or "SUB". Select "BILINGUAL" with the 1 or 2 cursor buttons, then select MAIN SUB MAIN+SUB with the 1 or 2 cursor buttons. HDMI AUDIO: This setting determines whether to play back audio input to the HDMI jacks through the SR7000 or output it through the receiver to a TV or projector. ENABLE: The audio input to the HDMI jacks can be played back by this receiver. THROUGH: The audio input to the HDMI jacks is not output from the speaker terminals of the SR7000. After you complete this portion of the setup, move the cursor to "RETURN" with the 3, 4, 1 and 2 cursor buttons and press the OK/ENTER button. TV DVD VCR1 DSS AUX1 AUDIO :DVD SLEEP :OFF MONO/ST:STEREO MULT:OFF VOL :VARI LEV :-90dB EXIT RETURN BACK MSPK: VOL : LEV : EXIT RETURN BACK (The SR7000 is not equipped with the MULTI ROOM SETUP B feature) 36 The SR8001 has source selectors, sleep timers and multispeaker output remote control units (Room A only) for the two other rooms in the multi room system. (The SR7000 has only one other room in the multi-room system. ) These features can be set from this menu. MSPK (MULTI SPEAKER): Switch the speaker output "ON" or "OFF" with the 1 or 2 cursor buttons. VOL (VOLUME SETUP): Select whether the multiroom or multi speaker output level is variable or fixed with the 1 or 2 cursor buttons. LEVEL (VOLUME LEVEL): Adjust the multiroom output level with the 1 or 2 cursor buttons. [. . . ] Set the HDMI audio output so that it turns on, as explained in the source component's instruction manual. Set the HDMI audio output so that it can connect to the SR7000/SR8001, as explained in the source component's instruction manual. In the "THROUGH" mode, sound is not produced from the SR7000/SR8001. · Use an analog connection. 68 TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]