Detailed instructions for use are in the User's Guide.
[. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] · Cannot display more than 20 tracks.
m Disc Number indicator
Displays the disc number chosen.
c MP3 indicator
This lights during MP3 play.
n Disc indicator
Displays the disc numbers on the tray.
d CD indicator
This lights during Audio CD play.
j Time indicator
Displays the time.
e PROGRAM indicator
This lights during program play.
k Track Number indicator
Displays the track number chosen.
f RANDOM indicator
This lights during random play.
g REPEAT indicator
This lights during repeat play.
6
NAMES AND FUNCTIONS REAR PANEL
ENGLISH
REMOTE CONTROL IN EXT. RS-232C OUT R COAXIAL OPTICAL ANALOG OUT L DIGITAL OUT FLASHER IN
AC IN
MODEL NO. (External/Internal switch)
When this unit is used as a standalone component, set this switch to the INT. When it is used connected to external component by a remote connecting cable and to audio component with a remote sensor that supports remote controls by Marantz, set this switch to the EXT. side.
C REMOTE CONTROL IN/OUT (input and output) connectors
When the remote control connectors on the unit and on a Marantz AV component are connected using the accessory remote connecting cables, the components can be operated as a system by remote control. · When connecting to a component which is equipped with remote control connectors, the unit's REMOTE CONTROL IN connector must always be connected to the REMOTE CONTROL OUT connector on the other component to be connected. · When connecting a component which is not equipped with an infrared remote sensor, this component must always be connected to the unit's REMOTE CONTROL OUT connector.
D ANALOG OUTPUT connectors
These are the output jacks of the analog audio signals. The supplied analog connection cord can be connected to the CD, AUX, or other connectors on an amplifier. Be sure to connect the L and R channels correctly to the corresponding jacks.
F DIGITAL AUDIO OUT OPTICAL
This jack is to be connected with a recording device, amplifier, D/A converter, etc that has optical digital input using an optional square type optical digital cable.
G Flasher Input jack
A control port for professionals (custom installers). This is used to control the unit from other rooms using keypad, etc.
Caution
Never connect to the PHONO connector on the amplifier.
Caution
If the unit is used as standalone and the switch is set to EXT. position, remote control unit cannot be used.
E DIGITAL AUDIO OUT COAXIAL
This jack is to be connected with a recording device, amplifier, D/A converter, etc that has coaxial digital input using an optional coaxial digital cable.
H AC Inlet
Connect the supplied power cord to this jack and a household AC power outlet.
B RS-232C External Control Port
A control port for professionals (custom installers).
7
NAMES AND FUNCTIONS
ENGLISH
REMOTE CONTROLLER
z ON button n 1, ¡ (Search buttons)
1: ¡:
While this button is pressed during playback, the track is searched backward. · The remote control code set is displayed on the display window for two seconds, and the setting is completed.
DISC
4 5
1 6 11 16
2 7 12 17
3 8 13 18
4 9 14 19
5 10 15 20
· When the remote control unit is set to CODE4
1 2 3 4 5 DISC 1 6 11 16 2 7 12 17 3 8 13 18 4 9 14 19 5 10 15 20 CD
· When the remote control unit is set to CODE5
1 2 3 4 5 DISC 1 6 11 16 2 7 12 17 3 8 13 18 4 9 14 19 5 10 15 20 CD
Caution
To reset the remote control to CODE1, press RECALL button and Numerical button 1 on the remote control unit at the same time for five seconds or more.
9
ENGLISH
CONNECTIONS
ENGLISH
Depending on your amplifier/receiver/Stereo System, there are various ways to connect to this player. For correct connection please refer to instruction manuals of stereo system to be connected. To Analog Audio output (white) (red)
Caution
Do not connect audio output from this unit to PHONO input of your audio system.
1. 2.
Connect the audio cable q to this unit's Analog Audio outputs and the stereo inputs on your amplifier, receiver or stereo system. Connect the optical cable w, coaxial cable e to the digital input on your AV amplifier, D/A converter, CD Recorder, etc.
REMOTE CONTROL IN EXT. EXT INT RS-232C RS 232C OUT
ANALOG OUT L
DIGITAL DIGITAL OUT
FLASHER IN
R
COAXIAL
OPTICAL
AC IN
MODEL NO. 74 CD-57
To Digital Audio output
w (Optional) e (Optional)
Audio cable q (Supplied)
To audio input terminals on amplifier
INTEGRATED AMPLIFIER
INPUT SELECTOR VOLUME
PHONO
CD
TUNER
AUX/DVD
1
RECORDER
2
Connect to digital input terminals of AV amplifier, D/A converter or CD recorder, etc. .
MUTE
PROTECT REC SELECTOR OFF POWER ON/OFF
PHONES
BASS
TREBLE
BALANCE
MIN SPEAKERS
MAX SOURCE DIRECT
TUNER AUX/DVD RECORDER 21 COPY RECORDER2 1 2
CD PHONO ON OFF
ON OFF
-
+
-
+
L
R
Left speaker
Right speaker
10
OPERATION
CONNECTING THE POWER SUPPLY AND TURNING ON
1.
Plug the power cable into AC Power Input jack on the rear panel.
1.
Press 0 OPEN/CLOSE button on the unit or remote control unit to open the disc tray. Hold the edge of the disc and place on the tray.
Caution
· Place a disc on each tray correctly. · Be careful not to have your finger caught when you close the tray. · Do not insert a disc in the way shown as the arrow.
NORMAL PLAYBACK
OPEN/CLOSE PLAY STOP PAUSE
5 DISC CD CHANGER 74 CD-57
1 2 3 4 5 DISC SKIP
REPEAT
RANDOM
LEVEL
STANDBY
ON
STANDBY
POWER ON/STANDBY
PHONES
OPEN/CLOSE
TIME
DIMMER
1 4 7
A C IN
2 5 8 0
3 6
1. 3.
OPEN/CLOSE
PLAY
STOP
PAUSE
5 DISC CD CHANGER 74 CD-57
9
RECALL
1
2
3
4
5
DISC SKIP
REPEAT
RANDOM
PROGRAM
LEVEL
4.
· Do not touch the back side (shiny side) of a CD. [. . . ] · Press Disc Select button on the main unit or remote control unit. To go back to program play again, press PROGRAM button while the main unit is stopped, and press 3PLAY button.
1.
To check the program, press RECALL button on the remote control unit twice while the unit is stopped to display track 5 of the disc 1.
1 2 3 4 5 TRACK DISC MIN SEC 7 3 5 CD PROGRAM
16
2.
Press DISC1-5 button on the main unit or remote control unit or DISC SKIP button on the unit to choose disc 3.
1 2 3 4 5 DISC CD PROGRAM
OPEN/CLOSE STANDBY ON
TIME
DIMMER
OPEN/CLOSE
TIME
DIMMER
OPEN/CLOSE
TIME
DIMMER
1 4
2 5 8 0
3 6 9
RECALL
1 4 7
PROGRAM
2 5 8 0
3 6 9
RECALL
0OPEN/CLOSE
1
2 5 8 0
3 7 6 9
RECALL PROGRAM
3.
Press 4/1, ¡/¢ button on the main unit, or 4/¢ or 1-9 button on the remote control unit to choose track 7.
1 2 3 4 5 DISC CD PROGRAM
4 7
PROGRAM
1. 2.
7 STOP
RANDOM AMS REPEAT
7 STOP
RANDOM AMS REPEAT
RANDOM
AMS
REPEAT
DISC 1
DISC 2
DISC 3
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
DISC 4
DISC 5
DISC 1
DISC 2
DISC 3
· When the track number is chosen with pressing 1-9 button on the remote control unit directly, it automatically changes to that number.
DISC 4
DISC 5
REMOTE CONTROLLER RC4001CC
REMOTE CONTROLLER RC4001CC
REMOTE CONTROLLER RC4001CC
4.
Press PROGRAM button on the remote control to change track 5 of the disc 1 to track 7 of the disc 3.
5 DISC CD CHANGER 74 CD-57
1 MP3 CD PROGRAM R TRACK DISC TOTAL EACH REMAIN MIN SEC 12345 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
2.
7 STOP
5 DISC CD CHANGER 74 CD-57
1 MP3 CD PROGRAM R TRACK DISC TOTAL EACH REMAIN MIN SEC 12345 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
7 STOP
OPEN/CLOSE PLAY STOP PAUSE
5 DISC CD CHANGER 74 CD-57
1 MP3 CD PROGRAM R TRACK DISC TOTAL EACH REMAIN MIN SEC 12345 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
OPEN/CLOSE
PLAY
STOP
PAUSE
1
2
3
4
5
DISC SKIP
2 3 4 5
RANDOM REPEAT 1DISC
REPEAT
RANDOM
1
2
3
4
5
DISC SKIP
2 3 4 5
RANDOM REPEAT 1DISC
REPEAT
RANDOM LEVEL
LEVEL OPEN/CLOSE PLAY STOP PAUSE
STANDBY
1
2
3
4
5
DISC SKIP
2 3
RANDOM REPEAT 1DISC
POWER ON/STANDBY REPEAT RANDOM
STANDBY
PHONES
1 2 3 4 5
CD PROGRAM TRACK DISC 7
STANDBY
4 5
POWER ON/STANDBY LEVEL
PHONES
POWER ON/STANDBY
PHONES
1 2 3 4 5 TRACK DISC MIN SEC 7 CD PROGRAM
1.
With Program mode, press 7 STOP button on the main unit or remote control unit to clear the programmed tracks one by one from the last track.
With Program mode, press RECALL button on the main unit or remote control unit to switch to Check mode of the program. With displaying the track number (or disc number) to clear, press 7 STOP button on the main unit or remote control unit to clear the chosen track number.
2.
With Program mode, press 7 STOP button on the main unit or remote control unit for 4 seconds or more to clear the whole program. [. . . ]