User manual MAGNEPAN MG12-QR

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAGNEPAN MG12-QR. We hope that this MAGNEPAN MG12-QR user guide will be useful to you.


MAGNEPAN MG12-QR : Download the complete user guide (132 Ko)

Manual abstract: user guide MAGNEPAN MG12-QR

Detailed instructions for use are in the User's Guide.

[. . . ] Due to the elegant simplicity and ruggedness of the design, the Magneplanar MG12/QR loudspeaker will give many years of trouble-free service. GENERAL DESCRIPTION The MG12/QR consists of a 2-way planar magnetic driver utilizing a common ½ mil. The voice grid of the bass section consists of a lightweight aluminum wire. If you need to transport the speakers, they can be shipped safely only in the original packaging. [. . . ] Begin moving the speakers forward or backward in increments of 6 to 12 inches. Positions close to a wall will often result in increased bass (often too much). B) STEREO WIDTH AND IMAGING--Once you have located the best position for the speakers and your chair for bass performance, separate the speakers by 50% of the distance from your chair to the speakers. (For example, if your chair is 10 feet from the speakers, move the speakers 5 feet apart. ) Now, move the speakers apart in increments of 3 or 4 inches at a time, listening carefully at each position. At some point you will start to hear two separate speakers instead of a "stage effect" (or continuous image). When this occurs, your speakers are too far apart: begin moving the speakers back in small increments until you notice a point at which you achieve one cohesive "sound stage. " For best results listen to speakers on axis with the listening position as shown in Figure 1 and 2. Figure 1 Figure 2 C) LEFT/RIGHT--The MG12's are matched pairs and mirror-imaged. The serial number for each speaker in the pair is the same, except for a "1" or "2" following each serial number. As you face the front of the speakers, the speaker with the "1" after its serial number has the tweeter near the left edge, and the speaker with the "2" has the tweeter near the right edge. To obtain correct phasing between the tweeter and bass of the MG12, the tweeters should be placed on the outside. NOTE: Once you have located the ideal speaker position you should mark it. A small tack or piece of tape can be placed on the carpet so that your ideal listening spot can be easily relocated when the speakers (or chair) are moved for cleaning, etc. In the event that your ideal listening spot is inconvenient from the standpoint of the room layout and decor, simply slide the speakers wherever they look best. Experience has shown that the speakers can be placed close to a wall, and it will make little difference for FM or background listening. The entire placement procedure may seem like a great deal of work, but is necessary in the setup of any high quality system. The time and effort expended should be necessary only once, and will repay the owner with countless hours of musical enjoyment. ROOM ACOUSTICS Magneplanars, like other bipolar speakers, usually sound best with a moderately reflective surface behind the speakers. In situations where the speakers must be placed as close as 2 feet from the back wall, a heavy damping material directly behind the speakers is advised; however, it should not cover the entire wall. Damping material in other parts of the room is a matter of trial and error. A word of caution--when audiophiles discover the effectiveness of damping material, they sometimes overdo it (on the premise that if a little is good, more is better). Before you make a permanent change to your room, experiment with the positioning of the damping material. [. . . ] For further information, see FAQ on web site at http://www. magnepan. com/faq. php#power 86dB @2. 83V/1 Meter/500Hz 4 Ohms 8-1/2" X 43-1/2" 600Hz (Acoustical) 17" W X 52-1/2" H X 1-1/2" D Limited 3-Year to Original Owner 63 Lbs Sensitivity: Impedance: Bass-radiating area: Crossover System: Dimensions: Warranty: Shipping Weight: Quasi Ribbon Tweeter Size: 2" X 38" *Because there are no universally accepted methods for loudspeaker measurements, frequency response specifications may be stated by most manufacturers without reference to measurement techniques and/or specific locations in rooms. Magneplanar loudspeaker frequency response specifications are minimum average performance levels that may reasonably be expected in normal installations. **New Magneplanar MG12/QR speakers will not display their full bass potential. After a month or two of use the bass response will lower a few cycles. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAGNEPAN MG12-QR




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAGNEPAN MG12-QR will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.