User manual MAGIC CHEF MCBR402S

[. . . ] They were prepared for various types/models of refrigerators therefore you may find in it description of some functions and accessories that your appliance does not have. Tips for Energy Savings Try not to open the door too often, especially when the weather is wet and hot. Every now and then check if the appliance is sufficiently ventilated (adequate air circulation around the appliance). Set thermostat from higher to lower settings as soon as possible (depends on how loaded the appliance is ambient temperature etc). Before loading the appliance with packages of fresh foods, make sure they are cooled to ambient temperature. [. . . ] If the ice/frost becomes hard and difficult to remove, you need to wait with the door open till the ice/frost melted. Do not use hot water or other electric devices (hair dryer etc. ) to heat it. After defrosting, take the water out and wipe the compartment dry with a soft cloth and then return the thermostat dial to the desired position. Never use a knife or other metal instrument to scrape ice/frost from the evaporator. 4 HOW TO CLEAN Cleaners: Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on any surface. For stubborn stains and for periodic Do not use sharp instruments to scrap off ice/frost. Freezer Section: Refrigeration Section: Wash shelves and other removable parts in warm sudsy water, rinse and dry. Wash interior with baking soda solution (3 tablespoons to I liter of water) or warm sudsy water, rinse and dry. Replace all parts and return thermostat dial to desired setting. HOW TO INSTALL Install the refrigerator in a convenient location away from extreme heat and cold. Allow sufficient clearance between the refrigerator and side wall so the door(s) will open without obstruction. Allow 5 inches of space between the refrigerator's side and the wall. POWER CORD REPLACEMENT If the refrigerator's power cord is damaged, have it replaced by a qualified repair agent. 5 WHAT TO DO . . . When the fridge is not in use for a prolonged period: Remove the power plug from the power point. When you wish to move the fridge: Secure all movable parts and contents. (Package them separately if necessary. ) Transport the fridge only in an upright position. If the refrigerator seems too warm inside: Check that the door has not been opened too frequently or for long. Check that the interior circulation is not obstructed by having too many goods stored. (The fridge is overloaded) Did you store anything hot, without first cooling it to room temperature?If so, rearrange them then check to see if operation has returned to normal. WARNING ­ Improper use of the grounding plug can result in a risk of electric shock. If it is extremely necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord should be AC 115-120V, 10A, or more. If a grounding adapter is used, make sure the receptacle box is fully grounded. 6 CHANGING THE REVERSIBLE DOORS CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the door reversal process. [. . . ] This warranty does not extend to any of our electronic products which have been subjected to misuse, neglect, accident, incorrect wiring not our own, improper installation, unauthorized modification, or to use in violation of instructions furnished by us, nor units which have been repaired or altered outside of our factory, nor to cases where the serial number there of has removed, defaced, or changed. This warranty is in lieu of all warranties expressed or implied and no representative or person is authorized to assume for us any other liability in connection with the sales of our electronic products. Initial defective is described as when the dealer opens the unit and finds that it is inoperative or an individual customer opening a new unit and finding that it is initially defective. Under no circumstances will an individual customer be permitted to return defective unit directly to factory. [. . . ]