User manual LG LSW400BG

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LG LSW400BG. We hope that this LG LSW400BG user guide will be useful to you.


LG LSW400BG : Download the complete user guide (7593 Ko)

You may also download the following manuals related to this product:

   LG LSW400BG (31098 ko)
   LG LSW400BG (7583 ko)
   LG LSW400BG (7582 ko)

Manual abstract: user guide LG LSW400BG

Detailed instructions for use are in the User's Guide.

[. . . ] 2 Caution Install the product according to the directions in the user manual. If the product is not installed based on the directions in the user manual, it can cause a serious injury or damage to the product. When installing the product or adjusting the height of the product after installing, always do so with 2 people. Working alone can cause the product to fall off and result in injury or damage to the product. During the installation, check the type of wall material and use the sealed anchor and screw if the conditions comply. If you do not use the designated anchor or screw, the mount may not be able to withstand the weight of the product and cause a safety issue. Do not wipe the product with a wet towel and do not use any heater or humidifier below where the product is installed. If water flows into the product or if moisture and heat are applied to the product, it can cause a fire, an electric shock or problem to the product. When drilling holes in the wall, always use a drill bit and drill of designated diameter. Also follow the designated directions for the depth of the hole. If the product is installed without following the designated method, the product may be unstable and cause a safety issue. Do not install the product near any object that may cause vibration. Do not install the product near any high voltage power cable or power source. Unplug the power cord from the power outlet before installing the product. If you install the product with the power cord plugged, it can cause an electric shock or a fire. Do not install the product with bare hands. [. . . ] - Assemble the guide spacer to the set by tightening the Install the PVC washer on models screw. 37/42/47LE53*, 37/42/47LE55*, - Tighten the screw until the set, guide spacer and the screw 42/47/55LX65*, 42/47/55LX68* are fully pressing against one another. Install the wall mount only after - Use the "+" driver (Manual or motorized) when tightening attaching the PVC washer the screw. Guide spacer screw 2 How to attach to masonry walls - Use the anchors for wall material of concrete, light concrete, strong natural stone, soft natural stone masonry brick and hallow block that do not crack. Please follow the below direction. - Check the material of the wall and the thickness of the finishing. -  hen installing the product on wall material not designated, install the product so that each fixated location can withstand W the pull out load of 70kgf (686N) and shear load of 10kgf (980N) or above. Anchor a b c d e Wall mount screw - Use the Ø8mm drill bit for concrete and hammer (Impact) drill. Use a drill bit Ø8mm to drill a hole for the anchor location within a depth of 80mm ~ 100mm b. Set the wall mount on the wall by aligning to the location of the hole. At this time, the bolt must be tightened with torque of 45kgf/cm or above. 3 How to install the wall mount <When installing on a masonry wall> → When you separate the 8 screws on the wall mount connected to the wall bracket for use with a wooden wall, it is much easier to install the product. → When installing the product on a masonry wall, turn the 8 screws on the A part counterclockwise to separate the screw and bracket. → After aligning the wall bracket to the location to install, mark the part to screw on the wall and then remove the wall bracket. 4 A LSW400B/LSW400BG Model Wall mount screw <When mounting to wooden studs> → If the screw cannot be assembled in the designated location inevitably, it can be assembled by rearranging to the closest location. → LSW200B/LSW200BG/LSW200BX/LSW200BXG : Assemble the wall mount screw on 1 left and 1 right location on the top part and 1 left and 1 right location on the bottom part. → LSW400B/LSW400BG : Assemble the wall mount screw on 2 left and 2 right locations on the top and 1 left and 1 right location on the bottom part. [. . . ] Make sure to keep a certain level of distance from the wall so that excessive force is not applied on the cable or accessory. → When you push the product with excessive force, the product can be damaged. 5 Safety clip * Assemble the wall mount support, product and safety clip. ENGLISH 5 How to level the Display After installing the display, check to make sure it is level. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LG LSW400BG




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LG LSW400BG will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.