User manual LG DP132H

[. . . ] OWNER’S MANUAL DVD Player Please read this manual carefully before operating your set and retain it for future reference. DP132H 2 Getting Started Safety Information 1 Getting Started CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. [. . . ] yy The unit is able to provide a 1080p full HD image to most 1080p-capable TVs in the market today. However, there are some 1080p TVs available from certain companies that are limited in the types of 1080p images that can be accepted. Specifically, 1080p-capable TVs that don’t accept images in 60Hz can’t display an image from this unit. yy Depending on your TV, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press RESOLUTION repeatedly until the picture re-appears. TV Y PB COMPONENT VIDE Connecting HDMI Cable Connect the HDMI on the unit to the HDMI IN on compatible TV with HDMI cable. (Type A, High Speed HDMI™ Cable) Rear of the Unit HDMI Cable TV COAXIAL Connecting 11 Connecting to an Amplifier Connecting Audio Cable Connect the AUDIO OUTPUT on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. yy If the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all. yy To see the audio format of the current disc in the on-screen display, press AUDIO. yy This unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this unit’s digital audio outputs. Note , , 2 Connecting Audio Cable Rear of the Unit Receiver / Amplifier Connecting HDMI Cable Connect the HDMI OUTPUT on the unit to the HDMI IN on amplifier with HDMI cable. (Type A, High Speed HDMI™ Cable) Connect the HDMI OUT jack on amplifier to HDMI IN jack on TV with HDMI cable, if the amplifier has HDMI OUTPUT jack. Rear of the Unit HDMI Cable TV COAXIAL Receiver / Amplifier HDMI Cable 12 System Setting Settings When the unit is turned-on at the first time, you have to select the desired language. (Optional) [DISPLAY] Menu TV Aspect Select which screen aspect to use based on the shape of your TV screen. [16:9]: Select when a 16:9 wide TV is connected. Adjust the Setup Settings You can change the settings of the unit in the [Setup] menu. 2. Use w/s to select the first setup option, and press d to move to the second level. 3 System Setting 3. Use w/s to select a second setup option, and press d to move to the third level. 4. Use w/s to select a desired setting, and press ENTER (b) to confirm your selection. Display Mode If you selected 4:3, you’ll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary. [LANGUAGE] Menu Menu Language Select a language for the Setup menu and onscreen display. Disc Audio/Disc Subtitle/Disc Menu Select a language for the Disc Audio/Disc Subtitle/ Disc Menu. [Original]: Refers to the original language in which the disc was recorded. [Other]: To select another language, press number buttons then ENTER (b) to enter the corresponding 4-digit number according to the language code list. (See page 21) If you make a mistake while entering number, press CLEAR to delete numbers then correct it. [Off] (for Disc Subtitle): Turn off Subtitle. System Setting 13 [AUDIO] Menu Set the player’s Audio options according to various disc output type you use. [LOCK] Menu Firstly, you have to create the 4-digit password on [Area Code] to use the LOCK menu. Display setup menu then input the 6-digit number “210499”. The password is deleted. Dolby Digital / DTS / MPEG Select the type of digital audio signal to use the DIGITAL AUDIO OUTPUT jack. [. . . ] Watch an During playback or pause mode, enlarged video press ZOOM repeatedly to select zoom mode. ZOOM: 100% : 200% : 300% : 400% : 100% w/s/a/d: Move through the zoomed picture. Music tu To Play repeatedly Do this Press REPEAT during playback. • TRACK/ ALL/ (REPEAT Off ) Create or delete your own program Press the PROGRAM to select desired file and then, { mark appears on screen. Using w/s and ENTER (b) to add a music file(s) on the program list, If you add desired music file(s), press PROGRAM to end edit program list. [. . . ]