User manual LG AG-S250

[. . . ] Failing to do so may result in damage to the product or a malfunction. The product may be easily taken off after putting on for some people. Do not spray cleaner directly onto the surface of the product. [. . . ] NOTE The accessories represented in this manual may differ from the actual appearances. PART NAMES AG-S230 (For Children) Liquid crystal Shutter Power Button LED indicator AG-S250 (For Audlts) Power Button Liquid crystal Shutter AG-S270 (Made of Metal) Power Button LED indicator Liquid crystal Shutter LED indicator USB port (charging port) 8-pin mini USB cable USB port (charging port) 8-pin mini USB cable USB port (charging port) 8-pin mini USB cable USING 3D GLASSES Button Operation Power On Power Off Press the Power button once. Press and hold down the Power button (2 second ~3 second) The power is automatically turned off if no signal is transmitted for 1 minute. It is turned off after no user movement for 10 min. LED Indication The red LED blinks once. The red LED blinks three times. Auto Off*1 The red LED blinks three times. Battery (Lithium polymer) discharge Automatic Channel Search - If the battery is discharged, the LED blinks for 1 minute and turns off automatically. After green LED flashes on and off, it is turned off when the search succeeds. Press the power button for at least 8 sec. !*1 The Auto Off function automatically turns the 3D glasses off if it senses no signal from the 3D signal emitter on the TV. A change in the distance or angle from the 3D signal emitter when the user moves can cause the Auto Off feature to activate. Automatic power off function automatically turns off the power when there is no movement for the continued duration of 10 min. during normal operation. 3 CHARGING THE GLASSES 1 Connect the USB port located under the power button on the glasses to the USB port of the TV or PC using the supplied 8-pin mini USB cable as shown by the figure. !CAUTION Do not insert the supplied 8-pin mini USB cable in the reverse direction. Otherwise, this may cause damage to the product. ENGLISH i. e) AG-S250 2 Charge the glasses until the LED is green. NOTE While charging: The LED is red. When charging is complete: The LED is green. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]