User manual LENCO RC-8-2

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LENCO RC-8-2. We hope that this LENCO RC-8-2 user guide will be useful to you.


LENCO RC-8-2 : Download the complete user guide (31 Ko)

You may also download the following manuals related to this product:

   LENCO RC-8-2 (94 ko)
   LENCO RC-8-2 (30 ko)
   LENCO RC-8-2 (33 ko)
   LENCO RC-8-2 BROCHURE (63 ko)
   LENCO RC-8-2 BROCHURE (63 ko)

Manual abstract: user guide LENCO RC-8-2

Detailed instructions for use are in the User's Guide.

[. . . ] P. 1 (1) IR (Infra-red) Transmission IR is being "sent" or "received". (3) POWER key The POWER key controls the same function as on your original remote control. (4) Number keys The number (1-9, 0, 11, 12) keys provide functions just like your original remote control. (5) -/-- key If your original remote uses one/two digit input switching (-/--), this Function can be obtained by pressing the -/-- key. [. . . ] The LCD shown as SUCCESS and the RC-8-2 is now ready to operate your TV. In any cases if you need to leave the quick/manual search, just press the [ESC] key to exit, the LCD will be shown as EXIT and back to normal operation mode. 11. To program other equipment, repeats the Steps 1-9 for your VCR, SAT, AUD and or your second TV or VCR or SAT. Press the [SET] key to for 2 seconds Press & release the [CH+] Press the [SET] key once Press the [DEVICE] key to select a desired mode Press the [SET] key to save the working code P. 5 SETTING UP BY LEARNING The RC-8-2 comes with a complete library of pre-programmed codes. After you have set up the RC-8-2 for your device, you may find that there are one or more keys that you had on the original remote control, which do not have a place on the RC-8-2 keypad. The RC-8-2 offers a special learning feature that allows you to copy almost any function from your original remote control onto the keypad of the RC-8-2. Before you start : ?Make sure your original remote control is working correctly. ?Make sure neither your RC-8-2, nor your original remote control is pointing at your device. To Learning (direct) : For example: To copy the "PIP" function from your original TV remote control onto the "I I" key of your RC-8-2. Make sure the ends which you normally point at your device are facing each other. Point the original remote to the front center head of the RC-8-2 (see picture below). Press the [SET] key to for 2 seconds and the LCD will be shown CODE SETUP. Press & release the [CH+] key for two (2) times to view the LEARN MODE page. Press the [Device] key to select a desired mode (TV, VCR, SAT or AUD, etc. . ). Press the "I I" key on the RC-8-2 remote where you want to place the learned function, the LCD shown as TV LEARNING. Press & hold the key that you want to copy (Example: PIP key on your original remote control). After learning is OK, the LCD shown as SUCEESS for 3 seconds then shown as TV LEARN KEY. If you want to copy other functions within the same mode, simply repeat steps 6 and 7 pressing the next key you want to copy by learning. 9. If you want to copy another function in a different mode, simply continue step 4 followed by steps 5, 6 and 7. In step 6, by pressing the [SET] key or Device mode key, you will exit the learning mode and back to normal operation of RC-8-2. Press the [CH+] key for two (2) times to the page of delete all keys and now the LCD shown as TV DELETE ALL. Press the [Device] key to select a desired mode (TV, VCR, SAT or AUD, etc. . . ). [. . . ] Press the [SET] key to for 2 seconds and the LCD will be shown CODE SETUP. Press & release the [CH+] key for seven (7) times to view the MARCO SET page. Press the [SET] key to enter MAC1 operation and the LCD shown as MAC1 KEY-01, press the key in the following sequence: 6. To store the MAC1, press the [SET] key to confirm and LCD shown as SUCCESS and back to normal operation, or press the [MAC1] or [MAC2] key for escape and the selected macro keys will not be stored. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LENCO RC-8-2




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LENCO RC-8-2 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.