User manual KRUPS DOLCEGUSTO

[. . . ] K and Ireland only : APPLIANCES WITH FITTED PLUG Important : For your convenience this appliance is supplied complete with a plug incorporating a 13 amp fuse. Unplug your appliance as soon as you have finished using it and when you clean it. Do not use the appliance if it is not working correctly, or if it has been damaged. Any intervention other than normal cleaning and maintenance by the customer must be carried out by an approved KRUPS service centre. [. . . ] If the power cord or the plug are damaged, do not use the appliance. To prevent any risk, you must have these replaced by an approved KRUPS service centre (see list in the service booklet) . Do not place the appliance on a hot surface such as a hotplate and never use it close to a naked flame. For your own safety, please use only the KRUPS accessories and spare parts which are suitable for your appliance. Do not use the appliance when the drip tray and the grille are not in place. Practical user tests are done with appliances selected at random, which explains any signs of use. Once the appliance reaches the correct temperature, the temperature indicator light (e) becomes fixed (green). Set the function selector (b) to the « » position and allow half the tank to run through. When the container is full, set the function selector (b) to the central position and empty the container. Set the function selector (b) to the « » position and allow the other half of the tank to run through. When the container is full, set the function selector (b) to the central position and empty the container. Caution: during and after steam operation, the nozzle (g) is very hot. Place a cup beneath the coffee outlet, and the capsule holder head must be closed and empty. Once the cup is full, reset the function selector (b) to the central position. As soon as the temperature indicator light (e) becomes fixed (green), you can start to prepare an espresso or hot water. Fill the tank (a) with fresh water (1) and position the switch (c) to «I». Once the appliance reaches the correct temperature, the temperature indicator light (e) becomes fixed (green). If necessary, clean the drip tray with hot water and a little non-abrasive washing-up liquid, rinse and dry. When refitting, put back the container, the indicator then the grille. The steam / hot water nozzle (g) Be careful : it may still be burning hot. If the opening in the nozzle outlet is blocked, clear it using a fine needle. To completely clean the cappuccino accessory, separate parts A, B and C (7). [. . . ] Descaling your NESPRESSO is essential to guarantee that your appliance is working at its best, will last for a long time and produce top quality coffee. Depending on how hard the water is in your region, this descaling should be performed every two to six months. However, if the water in your region is very hard or if you use the appliance a great deal, it would be advisable to do this more frequently. The NESPRESSO Club will supply you with a descaling kit comprising a sachet of descaling product, a sachet of cleaning product and a set of instructions for using these products. [. . . ]