User manual KETTLER SCHAUKEL 8396-100

[. . . ] The underground of swing and safety area should consist of fixed, shock absorbing ground. Pay attention to a sufficient distance to ground of at least 40 cm of swing elements. To ensure the equipment is stable, it is imperative to ensure that the swing is imbedded in concrete using the anchors supplied, by following our instructions as per diagram. [. . . ] Remember that the children's natural play instinct and temper may lead to unforeseeable situations excluding a responsibility of the manufacturers. Although dangerous situations for children are nearly impossible, if the swing is used properly, nevertheless supervise the use of the swing. for cleaning and caring the swing only use environmentally friendly and no aggressive or corroding agents. Read these instructions carefully before assembling the product or using it for the first time. They contain important information for your safety and for the correct use and maintenance of this KETTLER product. Keep the instructions in a safe place for information or for ordering spare parts. This KETTLER product has been designed in accordance with the latest standards of safety and subjected to constant quality monitoring. The data gained from this quality process is then incorporated in the development of our products. For this reason, we reserve the right to make changes in design and technology in order to offer our customers products of the highest standard of quality at all times. In spite of this, should you have any ground for complaint, please contact your KETTLER dealer. assemble the vehicle in the exact sequence shown by the letters in the diagrams. This is essential for the safe function and use of the scooter Bolt al the parts together loosely at first and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. [. . . ] Please bear in mind that there is always a danger of children injuring themselves whilst using 3 When ordering spare parts, always state the full article number, spare-part number, the quantity required and the inspection number stamped on the back. Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc. ) is required, this should be clearly stated on the order by adding the words "with fastening material". [. . . ]