User manual KENWOOD KVT-647DVD
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD KVT-647DVD. We hope that this KENWOOD KVT-647DVD user guide will be useful to you.
Manual abstract: user guide KENWOOD KVT-647DVD
Detailed instructions for use are in the User's Guide.
[. . . ] Always connect those wires to the power source running through the fuse box. Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). 2CAUTION
• If the power is not turned ON (or it is ON, but will be OFF immediately), the speaker wire may have a short-circuit or touched the chasis of the vehicle and the protection function may have been activated. [. . . ] After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. 21 7:12:57 PM
Connection
Monitor unit
For the sake of safety, be sure to connect the parking sensor. Accessory 3
Connect to the vehicle's parking brake detection switch harness using the supplied relay connector. Parking sensor wire (Green)
PRK SW
To vehicle's reverse lamp harness To car light control switch
Reverse sensor wire (Pink)
REVERSE
Dimmer control wire (Orange/White)
ILLUMI
Steering remote control input To Steering remote (Light Blue/Yellow) Ignition key switch Car fuse box (Main fuse) Car fuse box ACC
REMO. CONT
A
A B
Ignition wire (Red)
ACC
B C
Battery wire (Yellow)
BATT
(5A)
Ground wire (Black) - (To car chassis)
C
+
Receiver unit (front side)
SUB R-CAM V-IN VIDEO L R PRE OUTPUT REAR L R FRONT L POWER R
Accessory 4 Battery
VIDEO FM /AM ANTENNA VIDEO
AV OUTPUT AV INPUT 2 L AV INPUT 1 L R R L R
Antenna cord
FM/AM antenna input Accessory 1
C B
Ground wire (Black) - (To car chassis) Battery wire (Yellow)
(10A)
Connect to the terminal that is grounded when either the Mute wire (Brown) telephone rings or during conversation. To connect the kenwood navigation system, consult your navigation manual. Depending on what antenna you are using, connect either to the Motor antenna control wire (Blue) control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. When using the optional power amplifier, connect to its power Power control wire (Blue/White) control terminal. " terminal of the amplifier having the external External amplifier control wire (Pink/Black) amp control function. (Optional)
Connection cable (Included in the disc changer)
Receiver unit (rear side)
Accessory 2
TV tuner (Optional)
TV ANTENNA INPUT
FRONT L
White/Black White
+
Navigation System (Optional)
To front left speaker
FRONT R
Gray/Black Gray
+
To front right speaker If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. rEAR L
Green/Black Green
+
To rear left speaker
REAR R
Purple/Black Purple
+
To rear right speaker
B54-4502-00_00_English. Indd 5
TO NAVIGATION I/F
TO TV TUNER I/F
TO MONITOR UNIT
TO MONITOR I/F
TO 5L I/F
Connection cable (Included in the Navigation system)
Connection cable (Included in the TV tuner)
English |
5
06. 21 7:12:58 PM
Connection for AV Equipments
AV OUTPUT VIDEO FM /AM ANTENNA VIDEO AV INPUT 2 L AV INPUT 1 L R R L R-CAM V-IN VIDEO
SUB L R
PRE OUTPUT REAR L R FRONT L POWER R
R
■ Front Preout • Audio left output (White) • Audio right output (Red) ■ Rear Preout • Audio left output (White) • Audio right output (Red) ■ Subwoofer Preout • Audio left output (White) • Audio right output (Red) ■ Rear View Camera Input • Visual input (Yellow)
■ Audio/Visual Output • Visual output (Yellow) • Audio left output (White) • Audio right output (Red)
■ Audio/Visual input 1 (KVT-617DVD) Audio/Visual input (KVT-647DVD) • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Audio/Visual input 2 (KVT-617DVD only) • Visual input (Yellow) • Audio left input (White) • Audio right input (Red)
6 |
English
B54-4502-00_00_English. 21 7:12:58 PM
Installation for Monitor Unit
Firewall or metal support
Screw (M4X8) (commercially available)
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Metal mounting strap (commercially available) Accessory 5
Make sure that the unit is installed securely in place. [. . . ] Pull the unit all the way out with your hands, being careful not to drop it. (M5x6mm) or Accessory @ (M5x7mm)
Screws (included in audio unit package)
Audio unit or others Screws (included in audio unit package)
English |
9
B54-4502-00_00_English. 21 7:12:59 PM
■ Installation on Toyota Car using Brackets at Holes shown by "●"
or
When using the bracket shown above, you cannot use screws at two holes of the right and left unit sides. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD KVT-647DVD
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD KVT-647DVD will begin.