User manual KENWOOD KD 1500

[. . . ] DOUBLE OVEN model KD 150 Instructions for use - Installation advice Before operating this oven, please read these instructions carefully Downloaded from www. Com manuals search engine Dear Customer, Thank you for purchasing a Kenwood KD150 oven. The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance. [. . . ] 1 MODE Function selection (touched for more than 2 seconds): • setting the clock (only after first connection or after a power failure); • timer; • automatic cooking “dur” (duration) - how long the food will take to cook (by touching the “MODE” key again); • automatic cooking “End” - the time you would like the oven turns off (by touching the “MODE” key two more times). Illuminated symbols: Automatic c o o k i n g completed, oven in automatic position but not set AUTO flashing AUTO Oven set for automatic steady cooking, cooking illumination still not taking place flashing Timer being set in steady Timer illumination operation steady Oven set for illumination manual cooking and AUTO and AUTO AUTO flashing Automatic cooking being set Increases the number shown on the display Decreases the number shown on the display Oven set for steady automatic illumination cooking, cooking taking place 15 Downloaded from www. Com manuals search engine “TOUCH-CONTROL” KEYS The “touch-control” keys shall be operated by the fingers (just by touching the key). When using touch controls it is best to use the ball of your finger rather than the tip. The keys are automatically deactivated: • 8 seconds after the last selection; the deactivation is indicated by an acoustic signal (“beep”). € and “ ” keys (simultaneously) To reactivate just touch the “ MODE ” key or the “ for more than 2 seconds. When first connected, or after a power failure, the digits and “ AUTO ” will shown on the display. To set the clock, touch the “ MODE ” key, for more than 2 seconds, and then the “ ” or “ ” keys. Important: the oven does not operate, in manual cooking, without first having set the clock. € and “ To set the clock, with the appliance already connected, touch the “ ” or “ ” keys. Simultaneously (for more than 2 seconds), then “ Important: • • changing the time will delete any automatic program; after setting the clock, the oven starts to operate in the selected function (manual ” symbol is steady illuminated. The “ ” keys SETTING THE CLOCK USING THE TIMER You can use the timer at any time, even when the oven is not in use. € • • To set the timer, touch the “ MODE ” key for more than 2 seconds (the “ flashes), than the “ ” or “ ” keys. € symbol After about 8 seconds an acoustic signal (“beep”) will sound confirming the regulation ” symbol steady illuminated). (“ To check the remaining time touch the “ MODE ” key for more than 2 seconds. If the remaining time is more than a minute the display will show hours and minutes; if less than a minute the display will show seconds. Touch the “ MODE ” key , for more then 2 seconds, to turn it off; or press the “ ” or “ ” key to stop the beep and than the ” symbol flashing on “ MODE ” key, for more than 2 seconds, to deactivate the “ the display. Turn off the oven manually (function and thermostat knobs in the off position) if the manual cooking has been completed. Com manuals search engine SETTING THE TIMER VOLUME • • • • • Touch the “ ” and “ You can select from three volume levels. Touch the “ MODE ” key; you can read on the display the current timer volume (“ton1”, “ton2” or “ton3”). After about 8 seconds an acoustic signal (“beep”) will sound confirming the volume setting; then the time of day will be displayed. AUTOMATIC COOKING Use automatic cooking to automatically turn the oven on, cook, and then turn the oven off. [. . . ] We recommend that the appliance is connected by a suitably qualified person who will comply with the current IEE and local regulations. It is recomended that the appliance is connected via a dedicated cooker circuit using a double pole cooker switch with a rating equal or greater than the total loading of the cooker, with a minimum opening between the contacts of 3 mm. Alternative connection methods may be available as long as they conform to current IEE wiring regulations. The power supply cable must not touch the hot parts and must be positioned so that it does not exceed 75°C at any point. [. . . ]