User manual JENSEN VOYAGER VOM-783T

[. . . ] When Parked Parking in direct sunlight can produce very high temperatures inside your vehicle. Use the Proper Power Supply This product is designed to operate with a 12 volt DC, negative ground battery system (the regular system in a North American car). Protect the Disc Mechanism Avoid inserting any foreign objects into the slot of this player. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. [. . . ] You can change the way playback information is displayed to suit your needs. Press and hold the D/MENU button (7) for more than 3 seconds to display the system menu. You can then press the D/MENU button repeatedly or press the tune/track |||< or >||| buttons (18, 19) to access menu items. use the rotary encoder (4) to adjust the settings for a selected function. The display will return to the normal indication 5 seconds after the last adjustment or when another function is activated. Angle Turn the rotary encoder to adjust the angle of the front panel upward by choosing a setting from "00" to "12". contrast Turn the rotary encoder to adjust the screen contrast from "00" to "50". Bright Turn the rotary encoder to adjust the screen brightness from "00" to "50". Press the rotary encoder (4) to confirm each entry and move to the next field. Use the rotary encoder to change the source to "OUT", allowing you to output the audio/video source from the built-in DVD player to another device. tuner Set (Local/Distant) Turn the rotary encoder to choose "Local" or Distance". Press and hold the AS/PS button (15) to select six strong stations and store them in the current band using the AUTO PRESET feature. The radio will automatically scan the current band and enter strong stations into the preset memory positions. When using the AUTO PRESET feature, the new stations replace any stations already stored in preset memory. NOTE: You can stop the AUTO PRESET function at any time by pressing the AS/PS button again. If the disc is not removed from the unit within 15 seconds, the disc will be reloaded. NOTE: To prevent a disc from accidentally being damaged, always remove the disc from the unit when disc play is finished. Press 2/STOP twice if you want to resume playback from the beginning of the disc. NOTE: After the last track on a disc is played, the unit will stop playback. Track Selection The Track Select functions are used to quickly access the beginning of a track/chapter. Each time the track up (|||<) button (18) is pressed, the next higher track/chapter is selected, as shown on the display panel. Each time the track down (>|||) button (19) is pressed, the previous track/chapter is selected. [. . . ] The following points should be observed: · When cleaning the interior of the vehicle, do not get water or cleaning fluids on the unit. The CD/DVD player is a precision instrument and will not operate properly in extreme heat or cold. If such conditions occur, wait until the interior of the vehicle reaches a normal temperature before using the player. If the temperature inside the player gets too hot, a protective circuit will automatically stop play of the disc. [. . . ]