User manual JENSEN VOYAGER MSR2010
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JENSEN VOYAGER MSR2010. We hope that this JENSEN VOYAGER MSR2010 user guide will be useful to you.
Manual abstract: user guide JENSEN VOYAGER MSR2010
Detailed instructions for use are in the User's Guide.
[. . . ] Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and plain washer provided. Before final installation, test the wiring connections to make sure the unit is connected properly and the system works. Use only the parts included with the unit to ensure proper installation. Consult with your nearest dealer if installation requires the drilling of holes or other modifications to your vessel. [. . . ] The following items can be adjusted: · The reset button (18) should be activated for the following reasons: · If LOW BATT is set to "ON", a alarm will sound (8 beeps every 30 sec) when the voltage drops to 10. A visual warning (LOBA) will appear flashing (8 flashes every 30 sec) in the lower left corner of the LCD display. Press the EQ button (11) to turn on the equalization function and select between five predefined bass and treble curves: OFF > POP > JAZZ > CLASSIC > BEAT > ROCK. When listening to music at low volumes, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Connect the portable audio player to the AUX IN line in on the back of the unit. NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. In addition, the visibility of the numbers on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range. When the information is too long to be displayed on the LCD, press and hold the INFO/ SCROLL button (12) to view the entire title. The information will scroll twice and then return to abbreviated text. In the following modes and conditions, press the AS/PS button < 3 seconds to quickly exit the current operation without waiting for the system default time out: · The unit will pause for ten seconds at each preset station. Press AS/PS again to stop scanning when the desired station is reached. Press the BAND button (16) to change between three FM bands and two AM (MW) bands. Press and hold the TUNE/TRK >>| or |<< buttons (20, 21) to automatically seek the next or previous strong station. Press and hold the AS/PS (15) button for more than three seconds to automatically select six strong stations and store them in the current band. nOTE: During Auto Store (AS) , the tuner will default to "Local" mode while scanning the band initially. After scanning the entire band once, the unit will switch to "Distant" mode for all subsequent Auto Store tuning. The preset buttons (5-10) can be used to store 6 channels, allowing convenient access to your favorite channels. Press and hold a preset button (5-10) until the corresponding preset button number appears. Press the TUNE/TRK |<< / >>| buttons (20/21) to move between the three digits. [. . . ] This type of noise can be easily detected because it will vary in intensity of pitch with the speed of the engine. Usually, the ignition noise can be suppressed considerably by using a radio suppression type high voltage ignition wire and suppressor resistor in the ignition system. (Most vessels employ this wire and resistor but it may be necessary to check them for correct operation. ) Another method of suppression is the use of additional noise suppressors. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JENSEN VOYAGER MSR2010
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JENSEN VOYAGER MSR2010 will begin.