User manual JENSEN MSR170

[. . . ] Press SEL/MENU (5) repeatedly to step through the following sound adjustment options: Volume, Bass, Treble, Balance (left to right) and Fader (front to rear). when the desired option appears in the display , press VOL + or VOL - to adjust that audio feature. [. . . ] Press BAND/ENTER (11) to change between three FM bands and two AM bands. Press CH TUNE - (12a) or CH TUNE + (12b) momentarily, and the unit will automatically tune to the next strong station. Press CH TUNE - or CH TUNE + for more than three seconds to enter manual tuning mode. When "MANUAL" appears on the display, press CH TUNE - or CH TUNE + to move the radio frequency up or down one step. To automatically select six strong stations and store them in the current band, select a band (if needed) and press AS/PS (14) for more than three seconds. The six strongest stations are stored as presets, replacing any preset stations already stored in that band. Press AS/PS again to stop scanning when the desired station is reached. While in Sirius mode, navigate the three options in the user-preset channel group by momentarily pressing BAND/ENTER (16). Press AS/PS (17) to search for each user preset channel from SR1 to SR2 to SR3 and stop at each available channel for five seconds. Momentarily press CH TUNE - (18a) or CH TUNE + (18b) to move to the previous or next channel. To store favorite channels for quick access, select the desired channel, then press and hold the desired preset button (1-6) (19) for more than three seconds until the corresponding number appears in the display. While in Sirius satellite radio mode, press SHIFT/SCAN (20a) to select from four available modes: Normal, Category, Direct Tune and Set Skip Channel. When the Category or Set Skip Channel modes are selected, the corresponding icon appears in the display. To search the available music categories, press SHIFT/SCAN to access category mode then press CATEGORY (20b) or CATEGORY (20c) to scroll through the available category options. [. . . ] Protect CD's from dirt, dust, scratches and warping, as these may cause malfunction. For optimal performance, use CD-R discs with speeds 1x to 8x with write speed 1x to 2x. [. . . ]