User manual JENSEN JMC-326
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JENSEN JMC-326. We hope that this JENSEN JMC-326 user guide will be useful to you.
You may also download the following manuals related to this product:
JENSEN JMC-326 DATASHEET (879 ko)
Manual abstract: user guide JENSEN JMC-326
Detailed instructions for use are in the User's Guide.
[. . . ] MODEL JMC-326
DUAL FRONT LOADING CD SYSTEM WITH DIGITAL TUNER AND REMOTE CONTROL
INSTRUCTION MANUAL
Please read this Instruction Manual completely before using the unit and retain it for future reference
SAFETY INSTRUCTIONS
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
THE IMPORTANT SAFETY INSTRUCTIONS SHALL INCLUDE, AS APPLICABLE TO THE APPLIANCE, STATEMENTS THAT CONVEY TO THE USER THE INFORMATION ITEMIZED IN THIS PARAGRAPH: 1. Read instructions - All the safety and operating instructions should be read before the appliance is operated 2. Retain instructions - The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] The reception may be improved, but the sound is monaural (MONO).
TO PRESET CHANNELS This unit is equipped with 20 each preset memories for AM and FM. Once they are preset, they can be accessed by pressing the REP/PRST Button. While the channel indicator is blinking, press the # or " Buttons to select the desired preset channel. The Display will then show "Cd: " " after a few seconds since no disc is loaded. Open the CD DOOR by gently pulling on the CD DOOR at the marking "$OPEN". Insert one or two CDs with the label side facing out, into the CD Compartments of Disc 1 and Disc 2 and then close the CD DOOR. The total number of tracks on Disc 1 will be shown in the LCD Display after a few seconds.
3. When the Button is pressed during CD stop mode, the first track will be played. The Play Indicator "%" (D1) will be shown in the top left-hand corner of the LCD DISPLAY. The LCD DISPLAY will show the specific number of track, "Cd:01", being played. "01" will stop blinking and the music will continue playing from the exact position where it was paused. In play or pause mode, when the " or # Button is pressed once, the player will go to play the next track or go back to the beginning of the track. In play mode, when the " or # Button is pressed and held, the player will search the track with audible high-speed forward or backward playback. Repeat 1: When the REP/PRST Button is pressed once, the Repeat 1 Indicator "REP. 1" (D16) will be shown in the LCD DISPLAY. This single track of music will be played repeatedly.
9
7.
Repeat All: When the REP/PRST Button is pressed twice, the Repeat All Indicator "REP. To cancel the repeat function, press the REP/PRST Button repeatedly until the Repeat Indicator disappears from the LCD DISPLAY. To stop the CD, press the STOP/BAND Button once no matter the CD is in Play or Pause mode. The LCD DISPLAY will show the total number of tracks on the disc again.
8.
9.
10. LCD backlight goes off.
PROGRAMMED PLAY Programmed play can only be done under the following conditions: i. "Cd:01" will light up and "01" will change to "00" and blink along with the Program Indicator "PROG" (D18) to prompt for input. Note: The System will enter Alarm Setting mode if the PROG/SET Button is pressed and held for more than one (1) second. If this happens, please press the STOP/BAND Button or the PROG/SET Button once. [. . . ] To remove a disc from its storage case, press down on the center of the case and lift the disc outs, holding it carefully by the edges. Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth. compact discs have no grooves to collect dust and microscopic debris so gently wiping with a soft cloth should remove most particles.
CLEANING THE UNIT !To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JENSEN JMC-326
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JENSEN JMC-326 will begin.