User manual JBSYSTEMS MIRROR BALL 30CM V1.1

[. . . ] Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. [. . . ] Always use a certified safety cable that can hold 12times the weight of the mirror ball. This secondary safety attachment should be installed to the second safety eye in a way that no part of the installation can drop more than 20cm if the main attachment fails. Make sure that the chain used to hang the mirror ball can hold at least 12times the weight of the mirror ball. If you use a mirror ball motor, make sure to use an appropriate motor that can hold the weight of the mirror ball. In order to have a safe installation, you MUST follow the installation instructions supplied with the mirror ball. Make sure the rotation of the mirror ball is never slowed down or stopped by surrounding materials. The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. The installations should be inspected every year by a skilled person to be sure that safety is still optimal. Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the device and consult your dealer first. Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. Make sure the area below the installation place is free from unwanted persons during servicing. During inspection the following points should be checked: All screws used for installing the device and any of its parts should be tightly fastened and may not be corroded. Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any deformation. [. . . ] Always use an appropriate and certified safety cable, connected to the second safety eye, when installing the unit. Don't use the effect in the presence of persons suffering from epilepsy. Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. [. . . ]