User manual JBSYSTEMS LM 430 V 1.2
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JBSYSTEMS LM 430. We hope that this JBSYSTEMS LM 430 user guide will be useful to you.
You may also download the following manuals related to this product:
JBSYSTEMS LM 430 V 1.1 (1882 ko)
Manual abstract: user guide JBSYSTEMS LM 430V 1.2
Detailed instructions for use are in the User's Guide.
[. . . ] The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. Check the contents: Check that the carton contains the following items: LM430 with AC-adapter or LM440G ~ LM440F User manual Some important instructions: Before you start using this unit, please check if there's no transportation damage. [. . . ] Always replace a damaged fuse with a fuse of the same type and electrical specifications!In the event of serious operating problems, stop using the appliance and contact your dealer immediately. Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Do not use volatile liquids such as benzene or thinner which will damage the unit. DIMMER CHANNELS: these are 4 faders used to set the individual dimming levels of the 4 channels. Below each fader there's a flash button to set the output of the corresponding channel to 100% (full) for as long as the button is pressed. The flash buttons all have backlight so you can easily monitor the output of each channel. SWITCH CHANNELS: these buttons are used to switch 4 individual light effects ON/OFF. To be able to use these buttons you must connect a separate switch pack to the DMX-output of the unit. MODE SELECT: used to select 1 of the 4 user modes: HOLD DIM: This mode can be used to control the dimming levels of projectors on a small stage. The 4 faders (2) can be used to set the dimming level of each channel individually. HOLD SOUND: the music is divided into 4 different frequency ranges (bass, middle, high, antibass). Each of the four output channels will respond to a different frequency range. PROGRAM SELECT: When you selected 1 of the 2 program modes (4) then you can use the program select button to choose the program you like. BACKGROUND LEVEL: with this fader you can set the background level (minimum output level) of the 4 dimmer channels. This can "soften" the chaser effects so they become less aggressive. [. . . ] CHANNEL OUTPUTS: (only on LM440G ~ LM440F) Each channel output has its own output socket to connect any resistive and/or inductive (PAR36) projector(s). Always replace a blown fuse with a fuse that has the same characteristics!It's very important to know that the maximum load for each channel is rated at 8A or 1750Watts. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBSYSTEMS LM 430
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JBSYSTEMS LM 430 will begin.