User manual JBSYSTEMS CLS-8 V1.1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JBSYSTEMS CLS-8. We hope that this JBSYSTEMS CLS-8 user guide will be useful to you.


JBSYSTEMS CLS-8 V1.1: Download the complete user guide (1530 Ko)

Manual abstract: user guide JBSYSTEMS CLS-8V1.1

Detailed instructions for use are in the User's Guide.

[. . . ] Reproduction or publication of the content, even portions, in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. [. . . ] Therefore this speaker is intended for indoor use only, use of this product outdoors, in humid conditions and without proper protection, voids all warranties. This is potentially dangerous and should only be carried out by technicians who have perfect knowledge of the techniques and regulations of rigging speakers!® Speakon wiring is made as follows: POSITIVE = +1 NEGATIVE = -1 Attention: when a second speaker is connected, the impedance drops from 8 to 4!However, if your amplifier supports 2 loads, you can connect up to 4 cabinets to each amplifier output. Preferred setup combination: When used with a subwoofer you should try to keep a certain balance between the power of the satellite speakers (CLS-8) and the subwoofer (CLS-215B) to make a good sounding system. You should use 2 separate amplifiers plus an active crossover or audio processor crossed at +/-130Hz (24dB/oct). Cables to be used: You can use readymade cables, but of course you can also assemble the speaker cables yourself. You will also need a pair of ® ® Neutrik Speakon NL4FC connectors. Be sure to connect the same color on each side of the cable to the corresponding contact!If you inverse the conductors, poor sound quality with a lack of low frequencies will be the result. In most cases you can use the supplied hanging brackets to fix the cabinets to the wall: simply use the 4 special rigging points (2 on the top + 2 on the bottom of the cabinet) to attach the bracket. The CLS-8 cabinets also have several rigging points using M10 inserts. [. . . ] Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. This is potentially dangerous and should only be carried out by technicians who have perfect knowledge of the techniques and regulations of rigging speakers! [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE JBSYSTEMS CLS-8




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JBSYSTEMS CLS-8 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.