User manual JBSYSTEMS ALU CLAMPS 300KG

[. . . ] ALU CLAMP 300kg ALU CLAMP 500kg Operation Manual WWW. BRITEQ-LIGHTING. COM Copyright © 2007 by BEGLEC cva. Reproduction or publication of the content, even portions, in any manner, without express permission of the publisher, is prohibited. V1. 0 ENGLISH OPERATION MANUAL ENGLISH OPERATION MANUAL · The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. The installations should be inspected every year by a skilled person to be sure that safety is still optimal. MAINTENANCE Thank you for buying this BriTeQ® product. [. . . ] knob) x 11, 5cm x 3cm +/-0, 35kg 10 years 500kg 48mm to 51mm 12, 5cm (total height, incl. knob) x 11, 5cm x 5cm +/-0, 5kg 10 years · Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the device and consult your dealer first. · Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. If you sell the fixture, be sure to add this user manual. BEFORE USE · · · · · · · · · SAFETY INSTRUCTIONS: To protect the environment, please try to recycle the packing material as much as possible. Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. Always use an additional appropriate and certified safety cable when installing a device. Due to safety reasons it is prohibited to make unauthorized modifications to the clamps. Refer to the maximum load at the last page of this manual, this load must never be exceeded!These clamps may only be installed in vertical position with the M8 bolt and wing nut facing down. [. . . ] · Always use a certified safety cable that can hold 12times the weight of the device when installing it. This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the clamp fails. BriTeQ® 1/2 ALU CLAMPS 300kg + 500kg BriTeQ® 2/2 ALU CLAMPS 300kg + 500kg [. . . ]