User manual INTERMATIC UG28 MODULAR
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INTERMATIC UG28 MODULAR. We hope that this INTERMATIC UG28 MODULAR user guide will be useful to you.
Manual abstract: user guide INTERMATIC UG28 MODULAR
Detailed instructions for use are in the User's Guide.
[. . . ] The internal 100 KAIC fuses are the prime current protection devices for the UG Modular device. While the lead wires may be connected to either a bus bar or a multi-pole breaker, installation to a 30 amp breaker with the appropriate number of poles is preferred. Circuit breakers will not trip from transient surge activity due to their inherent slow response.
4.
MOUNTING
1. Attach the upper and lower mounting rails to the UG Modular Cabinet using the screws provided. [. . . ] Make sure that the UG Modular cabinet is properly secured to the mounting surface. Make sure that conduit is securely connected and all fittings have been correctly tightened. Make sure that the high leg in `High Leg Delta' units is connected to the center fuse terminal identified with the red lead. Each module should sit flat against the back-plate with the locking clips firmly engaged in the T-slots on each side of the module. Make sure that the replaceable fuses are properly seated and the fuse insulator panel is in place and properly secured. RESTORE electric power to the UG Modular unit circuit or equipment circuit. If all indicator lights are not illuminated, turn off power and repeat Final Checkout Procedure steps 1 through 8. If all indicator lights are still not illuminated, contact Intermatic at 800-391-4555.
OPERATION
1. The cabinet door should be closed and secured to prevent access by unauthorized personnel. The STATUS INDICATOR lights should be ON and visible through the viewing ports when the door is closed. The UG28 and UG30 Modular systems automatically react to transient surges and require no interaction by local personnel unless one or more indicator lights are out.
ALARM CONDITIONS
1. Unit is in alarm condition of one or more indicator lights are not illuminated. Contact your electrical contractor if you are not authorized to work on line voltage equipment. Inspect the UG Modular unit for obvious signs of catastrophic failure. Check breaker(s) or disconnect switch to make sure that power is being supplied to the UG Modular unit. A blown fuse or tripped breaker would indicate failure of one or more surge modules. Perform the `Final Checkout Procedure' to insure that fuses or connections have not worked loose. If at least one module indicator light is illuminated, follow the sequence below to determine if remaining modules are working. Exchange a `good' module and a `questionable' module by placing each in the other's socket position. If the indicator in the `good' module still illuminates and the questionable module's indicator light does not illuminate, the questionable module should be replaced. [. . . ] (3) Disclaimer of Warranty THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER EXPRESSED WARRANTIES. TO THE EXTENT ALLOWED BY LAW, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. (4) Limitation of Remedies IN NO CASE SHALL INTERMATIC BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL THEORY. SUCH EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, DAMAGE TO SOFTWARE, LOSS OF DATA, LOSS OF PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES OR SERVICES, DOWNTIME, THE CLAIMS OF THIRD PARTIES INCLUDING CUSTOMERS, DAMAGE TO PROPERTY AND PERSONAL INJURY. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE INTERMATIC UG28 MODULAR
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INTERMATIC UG28 MODULAR will begin.