User manual INTERMATIC CP150HPS

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INTERMATIC CP150HPS. We hope that this INTERMATIC CP150HPS user guide will be useful to you.


INTERMATIC CP150HPS : Download the complete user guide (159 Ko)

Manual abstract: user guide INTERMATIC CP150HPS

Detailed instructions for use are in the User's Guide.

[. . . ] 158HL12123 8/2/05 4:25 PM Page 1 HID Canopy Light - CP Series INSTALLATION INSTRUCTIONS Lamp Types: High Pressure Sodium 150 Watt Models: CP150HPS IMPORTANT: FOR OUTDOOR USE ONLY NOT FOR USE IN HAZARDOUS ATMOSPHERES ELECTRICAL REQUIREMENTS Read instruction sheet carefully before installing fixture. Retain instructions for future reference. A qualified electrician should complete all required wiring. [. . . ] (See Figure 3) 240 V CAP 277 V X3 X1 208 V 120 V COM IGN-01 X2 LAMP 5. Feed the matching voltage fixture wire, fixture wire marked "COM", and bare copper fixture grounding wire out of the fixture. Confirm all unused voltage fixture wires are appropriately capped within fixture body. Using provided twist on or other approved connectors, connect the fixture wires to the supply wires. Connect the selected voltage fixture wire to the Black (hot) supply wire. Connect the White fixture wire marked "COM" to the White (neutral) supply wire. Connect the bare copper (fixture ground) wire to the supply grounding wire. Install, and secure lens cover with (4) screws making sure that the gasket is properly seated. To weatherproof fixture, seal all holes in housing (mounting conduit, plugs, photocontrols, etc. ) with silicone sealant. To operate, restore power to the circuit and switch light on. WL100HPS (High Pressure Sodium) Figure 3 COM LAMP REPLACEMENT CAUTION: Use lamp of correct type and wattage as specified on fixture. 1. Remove old lamp and replace with new lamp of correct type and wattage. Install, and secure lens cover with (4) screws making sure that gasket is properly seated, free of debris, and compressed to seal out moisture. Properly dispose of lamp per manufacturer's recommendations. LIMITED 1 YEAR WARRANTY 3. 5. If within one (1) year from the date of purchase, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. [. . . ] This warranty is made by: Intermatic Incorporated/After Sales Service/7777 Winn Rd. , Spring Grove, Illinois 60081-9698/815-6757000 http://www. intermatic. com Please be sure to wrap the product securely to avoid shipping damage. THESE INSTRUCTIONS DO NOT COVER ALL VARIATIONS IN EQUIPMENT, NOR DO THEY PROVIDE FOR ALL SITUATIONS RELATED TO FIXTURE INSTALLATION, OPERATION OR MAINTENANCE. FOR FURTHER INFORMATION CONTACT YOUR DISTRIBUTOR OR INTERMATIC INCORPORATED - SPRING GROVE, ILLINOIS 60081 (815) 675-7000 www. intermatic. com 158HL12123 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE INTERMATIC CP150HPS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INTERMATIC CP150HPS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.