User manual INTERMATIC 158WF12662REF

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INTERMATIC 158WF12662REF. We hope that this INTERMATIC 158WF12662REF user guide will be useful to you.


INTERMATIC 158WF12662REF : Download the complete user guide (222 Ko)

Manual abstract: user guide INTERMATIC 158WF12662REF

Detailed instructions for use are in the User's Guide.

[. . . ] Turn valve on pump counter clockwise placing the handle in a horizontal position for maximum water flow. Turn the valve on the pump in a vertical position for minimum water flow. GENERAL INSTRUCTIONS FOR WATERFALL USE WF403 CAUTION: This pump has been evaluated for use with water only. NOTE: It is recommended the pump be set at its highest flow during assembly and later adjusted to a lower setting if desired. [. . . ] NOTICE: Do not place outdoors in weather conditions below 32°F, may cause water to freeze. 5. Turn pump on to verify flow making sure it is not too high and everything is operating correctly. Arrange river rocks on top of plate. NOTE: Ensure that the electrical cord loop below the electrical outlet. " This will prevent water from running down the cord into the electrical outlet. WARNING: · · IMPORTANT SAFETY INSTRUCTIONS LIGHTED LAMP IS HOT TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS: · · · · · · Do not connect with wet hands. Lens and shade get hot. Turn off/unplug and allow to cool before replacing lamp. Do not operate the luminaire fitting with a missing or damaged shield. NOTE: To clean pump, first make sure pump is UNPLUGGED from 120V circuit and remove front plate. Reassemble. MAINTAINING CLEANLINESS AND LIFE OF WATERFALL & PUMP Impeller Holder Motorhead 2. Periodically change water and clean the structure of the waterfall with a mixture of vinegar and cold clean water. Add water to waterfall periodically to keep water level at an optimum level (approximately 1/2" above pump) to avoid shortening the life of the pump. Water level should completely cover pump at all times. Regulator Front Plate Seal Ring Impeller Shaft Suction Bracket 4. To store waterfall after use, unplug the waterfall from the electrical outlet, empty the water, and store in a cool dry place. NOTE: Never let the pump run dry. If jets do not spray correctly, check water level and add if necessary or clean jet holes to unclog any deposits. If pump fails to operate, check the circuit breaker, or try a different outlet to make sure the pump is getting electrical power. If the pump gurgles, spews, or "burps", check the water level to make sure the pump has enough water to function. [. . . ] SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing the product, along with proof of purchase, postage prepaid to the authorized service center listed below. This warranty is made by: Intermatic Incorporated/After Sales Service/7777 Winn Rd. , Spring Grove, Illinois 60081-9698/815-675-7000 http://www. intermatic. com Please be sure to wrap the product securely to avoid shipping damage. LIMITED ONE YEAR WARRANTY AUTHORIZED SERVICE CENTER / CENTRO DE SERVICIO AUTORIZADO Intermatic Incorporated After Sales Service 7777 Winn Road Spring Grove, IL 60081-9698 / CENTRE DE SERVICE AGRÉÉ 158WF12662 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE INTERMATIC 158WF12662REF




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INTERMATIC 158WF12662REF will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.