User manual INTERMATIC 158TS11854-1

[. . . ] MODEL: T8805P101C PROGRAM TIME SWITCH WITH 14-DAY "SKIPPER®" WHEEL LR3730 FOR UP TO 60 OPERATIONS PER DAY SWITCH RATING: SINGLE POLE SINGLE THROW 15 AMP. , 1/2 H. P. 125 VOLTS A. C. CLOCK MOTOR: 125 VOLTS - 60 HZ. NOT FOR DIRECT PUMP CONTROL TIME POINTER DIAL TIME DAY SELECTOR SWITCH SKIPPER LINE (BLACK) 120 VOLT POWER COMMON SUPPLY NEUTRAL (WHITE) GROUND TO AUTO CLOCK TO SOLENOID FIGURE 1 WIRING DIAGRAM PROGRAMMING INSTRUCTIONS: 1. [. . . ] TO CHANGE ZONES: Leave one blank slot on yellow dial after ON line (gold pin), and valve will automatically advance to next zone. TO SET TIME OF DAY: Turn yellow dial CLOCKWISE, until correct line is at end of silver time pointer. TO SKIP DAYS: Turn black skipper wheel COUNTER-CLOCKWISE until todays day is in front of "14" arrow. PUT SELECTOR SWITCH IN AUTO: This switch can be used to turn the system ON or OFF for manual operation without affecting the set program. IMPORTANT NOTICE: Use the one silver pin that is located at Midnight on the yellow dial, it advances the skipper wheel automatically. Follow The National Electrical Code and local code requirements when installing this time switch. [. . . ] CAUTION: Always disconnect power at main panel before servicing this Switch or the equipment it controls. INTERMATIC INCORPORATED 158TS11854 SPRING GROVE, ILLINOIS 60081-9698 [. . . ]