User manual INTERMATIC 158TS11760
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INTERMATIC 158TS11760. We hope that this INTERMATIC 158TS11760 user guide will be useful to you.
Manual abstract: user guide INTERMATIC 158TS11760
Detailed instructions for use are in the User's Guide.
[. . . ] 158TS11760
7/27/04
3:49 PM
Page 1
MODEL: T105
LR3730
24 HOUR DIAL TIME SWITCH
ONE NORMALLY OPEN - ONE NORMALLY CLOSED CONTACTS
MAY BE WIRED AS SINGLE POLE DOUBLE THROW
40 AMP. [. . . ] To wire as SINGLE POLE DOUBLE THROW, install jumper (the same gauge as Line wire) between 2 and 3 and connect LINE to 2, LOADS to 1 and 4. Use 3/16 or larger screwdriver, tighten terminal screws firmly (25lb-in minimum). REPLACE INSULATOR BEFORE TURNING ON ELECTRICITY.
MINIMUM COPPER WIRE SIZE (AWG) MAX. 240 V.
PRESSURE PLATE TERMINAL SCREW MAKE SURE WIRE INSULATION CLEARS PRESSURE PLATE
14 12 10 8
15 20 30 40
60 60 60 75
1/2 1 2 -
2 2 1/2 3 5
N/A
N/A
PROGRAMMING INSTRUCTIONS 1. TO SET "ON" AND "OFF" TIMES: Hold trippers against edge of CLOCK-DIAL, pointing to time (AM or PM) when ON and OFF operations are desired, tighten tripper screws firmly. Turn in either direction and align the exact time-of-day on the CLOCKDIAL (the time now, when switch is being put into operation) to the pointer. [. . . ] See programming instructions.
INTERMATIC INCORPORATED
158TS11760 SPRING GROVE, ILLINOIS 60081-9698 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE INTERMATIC 158TS11760
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INTERMATIC 158TS11760 will begin.