User manual INDESIT IPG 640 S (BK)

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INDESIT IPG 640 S (BK). We hope that this INDESIT IPG 640 S (BK) user guide will be useful to you.


INDESIT IPG 640 S (BK) : Download the complete user guide (5268 Ko)

You may also download the following manuals related to this product:

   INDESIT IPG 640 S (BK) (661 ko)

Manual abstract: user guide INDESIT IPG 640 S (BK)

Detailed instructions for use are in the User's Guide.

[. . . ] This information is found on the data plate located on the appliance and/or on the packaging. Use the diameter of the cookware to choose the most appropriate burner to cook with. SAFETY DEVICE stops the gas flow if the flame is accidentally Before operating your new appliance please read this instruction booklet carefully. It contains important information for safe use, installation and care of the appliance. [. . . ] The hob can only be installed above built-in ovens with a cooling ventilation system. electrical connection Hobs equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate (this is located on the lower part of the appliance). If the appliance is to be installed above a built-in electric oven, the electrical connection of the hob and the oven must be carried out separately, both for electrical safety purposes and to make extracting the oven easier. Connecting the supply cable to the mains Install a standardised plug corresponding to the load indicated on the data plate. The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a minimum contact opening of 3 mm installed between the appliance and the mains. The circuit-breaker must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the circuit-breaker). The supply cable must not come into contact with surfaces with temperatures higher than 50°C. The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations. Before connecting to the power supply, make sure that: · The appliance is earthed and the plug is compliant with the law. The socket can withstand the maximum power of the appliance, which is The voltage is in the range between the values indicated on the data plate. if the socket is Incompatible with the plug, ask an authorised technician to replace it. Connection to the gas system must be carried out in such a way as not to place any strain of any kind on the appliance. There is an adjustable L-shaped pipe fitting on the appliance supply ramp and this is fitted with a seal in order to prevent leaks. The seal must always be replaced after rotating the pipe fitting (seal provided with appliance). These pipes must be installed so that they are never longer than 2000 mm when fully extended. Once connection has been carried out, make sure that the flexible metal pipe does not touch any moving parts and is not compressed. Only use pipes and seals that comply with current national regulations. When the installation process is complete, check the pipe fittings for leaks using a soapy solution. Adapting to different types of gas To adapt the hob to a different type of gas other than default type (indicated on the rating plate at the base of the hob or on the packaging), the burner nozzles should be replaced as follows: 1. Unscrew the nozzles using a 7 mm socket spanner, and replace them With nozzles for the new type of gas (see table 1 "Burner and nozzle characteristics"). In the case of the Mini WOK burner, use a spanner with a 7 mm opening to unscrew the nozzle (see figure). Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. [. . . ] Stainless steel can be marked by hard water that has been left on the surface for a long time, or by aggressive detergents containing phosphorus. This procedure must be performed by a qualified technician authorised by the manufacturer. It may happen that the appliance does not function properly or at all. Before calling the service centre for assistance, check if anything can be done. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE INDESIT IPG 640 S (BK)




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INDESIT IPG 640 S (BK) will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.